Belden CDT builds Intelligent Building in Phase II of henglong Plaza

The Belden IBDN structured cabling system product family of Belden CDT can provide systems of different performance levels to better meet the different requirements of today's different types of buildings and company cabling networks. Each of these systems is composed of fully integrated products that support existing standards. With high-quality components, outstanding design, and expert installation, Belden IBDN makes its products stand out in a wide range of Structured Cabling solutions.

The following describes the Belden IBDN Structured Cabling scheme for the next phase of henglong Plaza, a new landmark in Shanghai.

I. Project Overview

The Integrated Wiring System consists of a speech network system and a data network system. The purpose of this design scheme is to meet the information transmission needs of Building 2 of henglong square, and provide an integrated platform for the intelligent system based on the functional application of the building and the future development trend.

Ii. System Design Scheme

The Belden IBDN integrated cabling system can provide high-performance data and voice communication transmission media for Building 2 of henglong square. It can connect computers, printers, and other devices to any data information point, various types of telephone and internal communication devices can be connected to voice information points. The system is open, flexible, and scalable.

The telephone data center and data center are available on the 14th floor of Building 2 of henglong square. From the 14-story data center to the data center on each floor, cat-5e 25 pairs of cables and optical cables are cited. The data center on the-1 layer leads a 4-core Multimode Optical Fiber and two cat-5e 25 pairs of cables to the 14-story data center. master IDC; data centers on the 15th, 29-30, and 44 floors lead a 4-core multi-mode optical fiber and a cat5e 25 pair of cables to the total data center on the 14th floor; data centers on floors 1-12, 16-28, and 31-43 bring a 12-core multi-mode optical fiber, a 6-core single-mode optical fiber, and 16 cat-5e, 25 pairs of cables to the 14-layer data center ), configure the distribution frame.

Iii. system functions

Generic Cabling consists of six independent subsystems. Generally, a star structure is used to allow any sub-system to enter the generic cabling system independently.

1. Work Location in the workspace) the subsystem is also called the user subsystem)

The speech/data module consists of six categories: single-port or dual-port panel with diagonal angle. The connection ports and information sockets in the wiring room are point-to-point connections. Any operations that change the wiring system, such as adding or removing users or changing user addresses, do not affect the operation of the entire system.

2. Horizontal) subsystem

The level subsystem mainly uses four pairs of unshielded twisted pair UTP), which can support most modern communication devices. In some scenarios that require broadband transmission, the "fiber-to-desktop" solution can be used. Horizontal wiring uses a low-smoke, halogen-free, and six types of cables with a transmission bandwidth of 250 MHz.

3. Manage the Administration Subsystem

The vertical part of the speech uses the Belden ibdn bix connection system. The BIX connection system can be installed on the wall or 19 inch cabinets without any design changes. In addition, the BIX connection module provides the "no-interruption maintenance" function.

4. Trunk Backbone) subsystem
Data trunk: according to the requirements of the bidding documents, the vertical trunk uses indoor 4-core, 12-core multi-mode optical fiber and 6-core Single-Mode Optical Fiber. For the trunk of wiring rooms with more information points, A category 5-25 pair trunk cable is used as the trunk cable between management rooms and equipment on each layer. It is used to transmit voice signals through communication.

5. Equipment subsystem between devices

It uses a jumper distribution frame to connect hosts and network devices. This subsystem is composed of cables, connection jumpers, supporting hardware, and lightning protection devices. It can be said to be the central unit of the entire wiring system. Therefore, the proper layout, selection, and environmental conditions will directly affect the normal operation, maintenance, and flexibility of the information system in the future.

6. architecture group Campus) subsystem

From floor 1 to floor 14 of Building 2, the trunk system of the complex is equipped with a 72-core multi-mode optical fiber, a 96-core single-mode optical fiber, and 7200 pairs of cables. Corresponding distribution frames are configured on both sides. In order to facilitate the Jumper between building 1 and Building 2, two 1000 pairs of voice distribution frames are added to building 1.

Iv. Optimization Design

In the future, users have very high requirements on the information environment, but there is a strong uncertainty. Therefore, the best solution is to improve their most basic link services, and allow them to freely graft their own devices on the system. The Belden IBDN Fiber-Express system provides both modular and modular optical Fiber area cabling methods. The multi-core optical cable with professional core terminals can be mounted in the cabinet, ceiling, or any place only in the user area ). When a user enters the service and needs to provide high-speed network services, he must only lend the user enough Fiber-Express bar1 or 2). Each Bar comes with 12 connected SC Optical Fiber heads and coupler.

As one of the world's largest communication equipment companies, Belden CDT has offices around the world to provide timely and reliable technical support and after-sales services for its users, belden IBDN provides up to 25 years of product quality and System Application guarantee for its structured cabling system products, removing customers' worries about using its products and technologies.