Belkin vro settings-mobile phone

Most young people now use mobile phones to access the Internet. However, the traffic used for accessing the Internet is also quite large, which requires a lot of money, in fact, mobile phones can also access the Internet through wireless routers. This article uses the Belkin wireless router as an example to introduce how to use a mobile phone to access the Internet through a wireless router. 1. log on to the vro and log on to the Belkin vro. Open a Web browser, Enter the IP address 192.168.1.1 of the vro in the address bar, and press Enter to Enter the Belkin vro logon interface, enter the user name and password to log on.
2. Set parameter (1) WAN port setting this is for WAN. If you are using ADSL for Internet access, select PPPoE for the interface type, and enter your ADSL user name and password, if you are using a wired network or other broadband network, select a static IP address or another IP address based on the actual situation. Here, we only use common ADSL as an example. After setting, click Connect. If you are a subscription or yearly subscription user, we recommend that you select automatic connection. If you are a subscription user, you must select on-demand connection or manual connection, and set the automatic disconnection wait time. Otherwise, even if your computer is off, the Belkin router will still connect to the network. (2) After configuring www.2cto.com for DHCP, remember to confirm or save the settings. This is very important. It is best to set Automatic DHCP allocation, and not all users will set IP addresses on their mobile phones.
3. After setting Wireless Parameters, click OK or save. Enabling encryption will effectively prevent others from bypassing the internet. (1) The default SSID number is your Belkin router brand and model. You can change it to your favorite name. Note that you cannot use Chinese. (2) Default Frequency Band; (3) if you are a 150 M router, select 11 M. If you are a 54M router, select 54 M. If you are a M router, select M. (4) Enable the wireless function and enable the SSID broadcast check box to enable security settings. It is best to enable the function for wireless routers in your home.
4. Mobile phone settings generally do not need to be set, mainly for the mobile phone system (1) Android system: settings-wireless and network-WLAN-enabled; (2) Saipan system: menu-settings-connection function-bearer mode-add new access point; (3) automatically search for available access points; optional; if you know the SSID, you can select no and enter it manually, which is more convenient. The above is the whole process of the mobile phone's Internet access through the Belkin router. If you need a mobile phone to access the Internet, you can try to set it.
This article is from