Black apple-start of IOS learning, black apple-IOS Learning

Black apple-start of IOS learning, black apple-IOS Learning

Nine months ago, because I learned ios and was shy, I entered the trap of installing a black apple !!!

I know that it is not easy to install a black apple. Here I will write a tutorial on installing a black apple in Thinkpad E430c (Mac version: Yosemite 10.10.4), hoping to help anyone who needs it.

First, paste my computer configuration report:

--------------------------------------------------------------------- [Overview] Overview

Lenovo ThinkPad Edge e0000c laptop
Windows 10 Professional Edition 64-bit (DirectX 12)

Intel third-generation processor core i3-3110M @ 2.40 GHz dual core
Motherboard Lenovo 33651E5 (Intel Ivy Bridge-HM77 Express chipset)
Graphics card Intel HD Graphics 4000 (1897 MB/Lenovo)
Memory 4 GB (Hynix DDR3 1600 MHz)
WDC WD5000LPVT-08G33T1 (500 GB/5400 rpm)
Display Lenovo LEN40A0 (14 inch)
Optical Drive Hitachi-lg dvdram GT80N DVD recorder
Sound Card Conexant 20671 SmartAudio HD @ intel Panther Point High Definition Audio Controller
Nic (Wireless) BCM43142 802.11b/g/n/Lenovo (wired) Rui RTL8168/8111/8112 Gigabit Ethernet Controller

 

At present, my computer is Windows 10 and Yosemite 10.10.4 lazy dual system, MBR partition, using the chameleon guide.

Related installation files (http://pan.baidu.com/s/1jHu3Cge ):

 

1. Create a chameleon boot item

Change the "wowpc modify topic. iso" guide file under the resource package to "wowpc. iso" and copy it to the root directory of your window system disk (usually drive C. This boot file is obtained by modifying the chameleon topic image resource file. If you like the original version, you can use "wowpc. iso" in the "Chameleon 2.2" folder ".

Find "Chameleon Install.exe" in the "Chameleon 2.2" folder and run it. Generally, it will succeed. By default, a boot guide item named "Chameleon" is generated, you can use Esay BCD to modify the name. (For example)

 

After the above steps, you can see two boot items after the restart, and select "Chameleon" to successfully enter the Chameleon topic interface.

Note: Quick Start is enabled for win8 and win10 by default. The select boot Item Page may not be displayed when you start the system. If this happens, modify the default boot system.

 

 

2. Install HFS + for Windows 10.5 to read and write mac disks in Windows. The Windows disk format is NTFS, while the disk format in mac system is Mac OS extension (log type)

Installation Note: select the 10-day trial mode during installation. Restart immediately after the installation is complete. After the restart, a window is displayed asking for activation, select "I 've already got the key and serial number and want to activate the software. "and fill in the corresponding information.

Product Key
PSG-216-PEE-CB-10946352

Serial Number
05646-E957B-AF63E-B5508

 

3. Disk allocation

Disk allocation: Use System disk management tools (right-click my computer> Manage> disk management) or other tools (DiskGenius software ), compress the size of the required installation space (generally divided into "installation" and "system". The installation disk only requires 10 Gb of space, in addition, the size of the yosemite system disk is determined by the size of the system disk. The size is no less than 20 GB. You can search for the disk space on the Internet. Do not format the compressed two drive letters ).

Specific Operation: In the disk management tool, right-click the last drive letter of the computer and select "compressed volume". The general compression size is 10 GB (installation disk) + 50 GB (System Disk) = 60 GB, then, a green disk area appears. Right-click it and select "new simple volume". Assign the drive letter (I disk here), which is 10 Gb in size. Do not format it, as the installation disk. Repeat the steps to create a simple volume and allocate all the remaining 50 GB to it (called Disk J). Similarly, do not format the volume and declare it again, do not format a simple volume when creating it.

Create a USB flash drive: search for "PE tool" on the Internet (Ton8PE_V5.0 is used), and relevant tutorials are available. I will not repeat them here. (This USB flash drive will be used later)

 

4、image file (when downloaded, use the software hash.exe to check whether the MD5 value has changed. If the MD5 value is different, download it again)

Image download link: http://pan.baidu.com/s/1c1axe84

File: Yosemite Install (14E46). cdr
Size: 7168032768 bytes
Modification time: July 2, 2015, 15:58:54
MD5: F15001880208905B7305C4D1AFCECCEE
SHA1: 0E87E27CA77D4087DA15C24CC2F734DA5BFFFC73
CRC32: 9BADC7F5

Loading procedure: Run mongoddmac.exe in the folder of the kubernetes help folder as the administrator ID. Select the path where your image file is located, select the target partition as your installation partition (disk I), and remove the three options that are deselected, after about 5-10 minutes, all done and hava fun will appear! It indicates that the operation is successful.

　　

If no AF: success occurs. Download diskgenius.exe, right-click disk I, and select change partition parameter (F11) in the pop-up menu ). Manually enter the uppercase AF in the System ID.

 

5. Extra file configuration (the Extra file here is only a Thinkpad e0000c model notebook, and the video card is the same as mine. You can also try it, in the subsequent steps to enter the system, perform troubleshooting in five countries)

Open the I disk after writing, change the "Extra (installation)" folder in the resource package to "Extra", and put it in the root directory of the installation disk (I disk.

　

Some instructions on Extra files: the "Extensions" folder is not required, it is necessary to place some mouse and keyboard driver files, and there are two files "org. chameleon. boot. plist and smbios. plist ", we open it with notepad and find some key-Value Pair parameters in it. If you are interested, search for the" Chameleon startup parameters ". I believe there is a lot of information on the Internet.

 

6. Restart your computer and start installation.

Before selecting boot guide, go to BIOS to check whether the AHCI disk mode is enabled. If it is not AHCI, search for it and change it to AHCI. (for example, if my computer is powered on, press fn + f1, change "SATA" mode to "ACHI" Mode under the second tab. On the contrary, if you want to enter the window system next time, change it to SATA again)

Select the boot guide of your mac system on the boot item selection interface. For example, if my boot item is changed to "Yosemite 10.10.4", select your idisk after entering the chameleon topic interface, the drive letter named "Yosemite Install (14E46)" (use the keyboard to operate "->"), enter "-v" on the keyboard, and the computer screen will continuously scroll to output logs, you can install the welcome page here.

In fact, this is also the most prone to problems. The Common Errors I encounter are rolling screen restart, scrolling, and getting stuck after two or three pages, because I used my configuration file to help others install several black apples, it is generally because of the chameleon boot core (wowpc. iso file) and the System boot core (the kernel File in I: \ System \ Library \ Kernels. (For other problems, search for the "five-country error" check on the internet). If the "Ban mark" appears, it is because the "SATA" mentioned above has not been changed to "AHCI ".

10 thousand sentences are omitted here (I didn't know how long it took to get stuck in this step)

........................

........................

........................

........................

........................

 

7. The installation page is successfully displayed.

I have had a hard time and finally succeeded !!!

1> select "simplified Chinese as the main language" and click "->"

2> click "utility" --> "disk tool" in the menu and select the disk to be erased, --> "erase" tab (Do you still remember that we have a J disk formatted in the previous step ?) --> Click "erase ".

Be sure to select the disk
Select the disk and click "erase,
Format: "Mac OS extension (Log Type )"
Name: Yosemite 10.10.4
Click to erase

3> click the close button in red in the upper left corner.

4> go back to the "Install OS X" Page, select the empty disk you just erased, and click the "Install" button.

5> then wait for 15-45 minutes and you will be OK. (The time depends on the computer configuration. Try to move the mouse as much as possible throughout the process. Do not make the computer black screen)

6> the installation may fail in the last few minutes, depending on the computer configuration. The installation may have been successful.

 

8. Installation successful (ignore this step on the startup item selection page)

After the installation is successful, you will be asked to restart and choose to restart. At this time, you will find that you cannot enter the system at all, nor can you choose the startup Item.

At this time, the U disk boot disk made in front will be used, plug in the U disk, let the computer choose a U disk to start (like my computer is Boot by fn + f12, select a category similar to "U disks', enter the peoperation interface, find the diskgenius_pro.exe software (included in the PE tool when the USB flash drive is created), right-click your windows system disk (drive c) --> activate the current partition.

Change AHCI to SATA ).

Go to the window and find the J drive (that is, the mac system disk, not the 10 Gb installation disk). Open it (because the Extra file in the installation disk won't be copied for you) find the "Extra (successfully installed)" folder in the resource package --> change it to "Extra" and paste it to the J root directory.

Restart, change SATA to AHCI, select the boot entry for mac, enter the chameleon topic interface, and select "Yosemite 10.10.4". Note that this is not the installation disk "Yosemite Install (14E46, it's the J drive. Then, please use it happily!

 

9. Description of other files in the resource package (for Lenovo e0000c, try other laptops)

Note: It is best to back up the kext file with the same name in the mac system disk (in the <J disk> system-> library-> extensions folder) and delete it, put your cracking file.

After saving the. kext file to the Active Directory of the mobile phone system, fix the mac disk permissions. In this case, open the disk tool, select your mac system disk (Disk J), and click "Repair Disk Permissions", as shown in the interface.

1> 10.9.3 crack the power management DRIVER: this is the power management driver of the notebook, put the. kext file in the system.

2> GenericUSBXHCI. kext

3> RealtekRTL81xx-0_0_90.pkg: wired NIC Driver, double-click to install, if your mac prompts prohibit third-party software installation, set your mac security items and privacy to "allow any source" (detailed steps for online search, which are under the window, switch to mac and restart again ...)

4> VoodooHDA_v2.8.5.pkg: the universal sound card driver. You can install it. (This also seems to require a restart. If no sound is found after the restart, set the sound output option to "external". If it is still useless, try another method)

　

 

So far, your black Apple should be almost ready for use.

It is recommended that you do not want to buy a black apple. Once and for all, upgrading the system of the black apple is also a major problem. I also want to learn ios and try to get in touch with the black apple. All in all, be patient when playing black apple.

From today on, I have recorded my ios learning journey in this blog Park. I hope I can go further!

 

I finally matched my desktop image: