BPI-M1P (full chi A20) brush Android Boot card after starting the process

http://blog.csdn.net/wb4916/article/details/78031511
BPI-M1P (full chi A20) brush Android Boot card after starting the process

BPI-M1P (full chi A20) brush Android Boot card after starting the process

2017/9/19 16:48

1. Insert the 16GB class-10 TF (minimum 8GB) card into the Win7 computer after inserting it into the card reader.

2, through the tool apst download: Card production tool PhoenixCardV4.1.1 there is no outer directory. ZIP (end-customer can find a reseller/solution company)

The Phoenixcard software is used to write the firmware to be produced by the SD card reader to the SD card. Users can choose a different mode of the SD card burned into the production mode or the startup mode, after the completion of the burn can be used to write a good SD card for the production of equipment or start.

3, if the presence of 360 security defender blocking is normal, select: Allow the program to run. (Mildly speaking: the whole ambition did not find 360 certification.) ^_) ￥ The problem

4. Please select your compiled firmware: sun7i_android_sugar-ref001.img

Please choose the burning mode: Boot card.

5, Burning completed (correct selection completed):

6, after the completion of burning log information:

Xshell 5 (Build 0964)
Copyright (c) 2002-2016 Netsarang Computer, Inc. All rights reserved.


Type ' help ' to learn. Xshell prompt.
[c:\~]$


Connecting to COM5 ...
Failed to open COM5.


Type ' help ' to learn. Xshell prompt.
[c:\~]$


Connecting to COM5 ...
Connected.


?? Hello! BOOT0 is starting!
Boot0 version:3.1.0
DRAM size =1024
Card Boot number = 0
Card No is 0
SDcard 0 Line Count 0
[MMC]: MMC driver ver 2014-04-3 16:20
[MMC]: ***try SD card 0***
[MMC]: Sd/mmc card:4bit, CAPACITY:14992MB
[MMC]: Vendor:man 0x0002544d Snr 0x20f53f3f
[MMC]: product:sa16g
[MMC]: revision:1.2
[MMC]: ***SD/MMC 0 init OK!!! ***
SDcard 0 Init OK
The size of Uboot is 0x000b0000.
Sum=0xee2e7fea
Src_sum=0xee2e7fea
Succeed in loading uboot from SDMMC Flash.
Ready to disable Icache.
Jump to Secend Boot.
[0.251]


U-boot 2011.09-rc1 (Sep 2017-11:22:54) Allwinner Technology


[0.259]version:1.1.0
[0.262]pmbus:ready
[0.367] pmu:axp209
[0.369] pmu:axp20x found
[0.372] Pmu:bat ratio = 100
[0.378] PMU:DCDC2 1400
[0.389] PMU:PLL1 912 Mhz
Boot_clock = 912
Dcdc2_vol = 1400
Dcdc3_vol = 1250
Ldo2_vol = 3000
Ldo3_vol = 2800
Ldo4_vol = 2800
Power_start = 0
Storage_type = 0
Usb_recovery = 1
Find power_sply to end
Fel key old mode
Run Key Detect
No key found
No key input
Dram_para_set start
Dram_para_set End
[0.430] Dram:1 GiB
Relocation Offset is:35b17000
User_gpio Config
User_gpio OK
[Ir_boot_para]:the ir is no use
Workmode = 0
mmc:0
[0.546] [MMC]: MMC driver ver 2014-5-23 10:07:00
[0.551] [MMC]: Get sdc_odly_25m fail,use default dly 0
[0.557] [MMC]: Get sdc_sdly_25m fail,use default dly 5
[0.562] [MMC]: Get sdc_odly_50m fail,use default dly 3
[0.567] [MMC]: Get sdc_sdly_50m fail,use default dly 5
[0.572] [MMC]: Get sdc_f_max fail,use default Sdc_f_max 52000000
[0.579] [MMC]: SUNXI sd/mmc:0
[0.591] [MMC]: ************try SD card 0************
[0.626] [MMC]: MID 000002 PSN 20f53f3f
[0.629] [MMC]: PNM sa16g--0x53-41-31-36-47-00
[0.634] [MMC]: PRV 1.2
[0.636] [MMC]: MDT m-10 y-2013
[0.640] [MMC]:---------------mmc->clock 52000000-----------
[0.645] [MMC]:---------------mmc->bus_width 4--------------
[0.651] [MMC]: Sd/mmc card:4bit, CAPACITY:14992MB
[0.656] [MMC]: boot0 capacity:0kb,boot1 capacity:0kb
[0.662] [MMC]: ************SD/MMC 0 init OK!!! ************
[0.668]sunxi Flash init OK
drv_disp_init:opened
[0.773]boot_disp.output_type=2
[0.776]boot_disp.output_mode=5
[0.779]boot_disp.auto_hpd=1
Error:open Config.fex, maybe it is not exist
Hdmi_dvi_enable is NULL
HDMI_GET_INPUT_CSC is NULL
In:serial
Out:serial
Err:serial
--------FastBoot Partitions--------
-total partitions:11-
-name--start--size-
bootloader:1000000 2000000
env:3000000 1000000
boot:4000000 1000000
system:5000000 20000000
recovery:25000000 2000000
databk:27000000 10000000
misc:37000000 1000000
private:38000000 1000000
data:39000000 40000000
cache:79000000 14000000
udisk:8d000000 0
-----------------------------------
Base Bootcmd=run Setargs_mmc Boot_normal
Bootcmd Set SETARGS_MMC
Key 0
Recovery key High 6, low 4
Cant find FSTBT value
To be run Cmd=run setargs_mmc boot_normal
The user data ' magic is bad
Work_mode_boot
Sunxi_bmp_display
F_read BTR over hd12871
Read Byte = 177288
[0.937]fetch script data boot_disp.virtual_logo_width fail or vale=0
Config_arch_sun7iw1p1:coef_rdy_en!!!
[0.947] Hit any key to stop autoboot:0
Read boot or recovery all
[1.519]sunxi Flash read:offset 4000000, 13483446 bytes OK
[1.530]ready to boot
[1.532] [MMC]: MMC Device 2 not found
[1.536] [MMC]: MMC not find,so not exit
[1.540]
Starting kernel ...


[0.769756] aw_pm_init:not support Super standby.
[0.812264] SW_AHCI sw_ahci.0:sata power enable do not exist!!
[1.170628] [HDMI]HDMI module Init
[1.181269] # #fb init:w=1280,h=720,fbmode=3
[1.308664] init:/init.rc:394:ignored duplicate definition of service ' console '
[1.702848] Init:start e2fsck listening ...
[2.287566] Ext4-fs (MMCBLK0P12): Vfs:can ' t find EXT4 filesystem
[2.340727] Init:buffer:/DEV/BLOCK/MMCBLK0P12
[10.119586] Init:do_umount:/data
[10.123634] Init:do_umount error = Invalid argument
[10.317693] Ext4-fs (mmcblk0p13): Vfs:can ' t find EXT4 filesystem
[10.380674] Init:buffer:/dev/block/mmcblk0p13
[10.708588] Init:c_in_start
[10.711993] Init:path =/dev/block/data
[15.512915] Init:do_umount:/cache
[15.517050] Init:do_umount error = Invalid argument
[15.560328] Init:start Format/dev/block/udisk
[15.565799] init:wait for Format/dev/block/udisk
[15.565996] Init:fork to Format/dev/block/udisk
[15.717092] Init:c_in_start
[15.720608] Init:path =/dev/block/cache
[18.974960] Init:format/dev/block/udisk OK
[19.476608] Init:start format/dev/block/private
[19.482235] init:wait for Format/dev/block/private
[19.488859] Init:fork to Format/dev/block/private
[20.052409] Init:format/dev/block/private OK
[20.062359] Ext4-fs (MMCBLK0P9): Vfs:can ' t find EXT4 filesystem
[20.100691] Init:buffer:/DEV/BLOCK/MMCBLK0P9
[23.773669] Init:do_umount:/DATABK
[23.777842] Init:do_umount error = Invalid argument
[24.090388] i²c i2c-1: Invalid 7-bit i²c Address 0x00
[24.729462] init:cannot find '/system/etc/install-recovery.sh ', disabling ' flash_recovery '
[24.745654] Android_usb:already disabled
[24.755399] init:using deprecated syntax for specifying property ' Sys.usb.config ', use ${name} instead
[24.771883] init:using deprecated syntax for specifying property ' Sys.usb.config ', use ${name} instead
[Email protected]:/#
[Email protected]:/#
[Email protected]:/#
[Email protected]:/#
[Email protected]:/#
[Email protected]:/#
[Email protected]:/# [67.465587] init:untracked pid 2973 exited
[192.538699] Start_powernow uncare mode:859320624!
[195.459781] Init:sys_prop:permission denied uid:1003 name:service.bootanim.exit


[Email protected]:/#
[Email protected]:/#
[Email protected]:/#
[Email protected]:/# [208.701598] init:untracked pid 3860 exited

BPI-M1P (full chi A20) brush Android Boot card after starting the process