CactiEZ----Monitoring Windows Host server R2

Monitoring a Windows host, you need to install the "Simple Network Management Protocol" (SNMP) on the monitored host, and make the basic configuration, this article takes server R2 as an example simple introduction

1, first log on to the server, find the server Management---function---Add features---Select the SNMP service---next step to install.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/71/FA/wKiom1XcAB-R-klzAAOn2IJ6onc628.jpg "title=" 3.png " alt= "Wkiom1xcab-r-klzaaon2ij6onc628.jpg"/>

2, select the Server Management---Configure---services---SNMP server right-click Properties, Add public, read-only . You can select SNMP packets from any host (for security not recommended), or you can add the appropriate host , as

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/71/FA/wKiom1XcAL3waVsNAAeTb0fmI88368.jpg "title=" 2.png " alt= "Wkiom1xcal3wavsnaaetb0fmi88368.jpg"/>

3, right-click to restart SNMP server.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/71/F7/wKioL1XcA_7Qmk7jAAimJZ3vg_Q964.jpg "title=" 1.png " alt= "Wkiol1xca_7qmk7jaaimjz3vg_q964.jpg"/>

4, add the firewall UDP 161 port.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/71/FB/wKiom1XcAf6iaVoWAAObAN_LDyM161.jpg "title=" 4.png " alt= "Wkiom1xcaf6iavowaaoban_ldym161.jpg"/>

5, in the monitoring of the host to test, use the statement Snmpwalk-c public-v 2c 192.168.1.34 (the IP address of the Windows host), if there is a message stating that it is normal, then you can be added on the monitoring page

6, Login Cactiez-web interface, click: "Console", "Host", "Add". Similar to the following settings:

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/71/F7/wKioL1XcBSfxe5DsAAdCkLA85-4715.jpg "title=" 5.png " alt= "Wkiol1xcbsfxe5dsaadckla85-4715.jpg"/>

If everything works, you'll see something like this:
Windows Host (192.168.0.1)
SNMP Information
operating system: hardware:x86 Family 6 Model Notoginseng stepping 2 at/at COMPATIBLE-
software:windows Version 5.1 (Build 2600 multiprocessor free)
operating time: 56379 (0 days, 0 hours, 9 minutes)
Host Name: Windows-host
Location:
Contact:

7 . Click "Add graphics for this host" and tick the various indicators you need to monitor. Note The difference between the three- position and the system. You can add Windows host monitoring as expected.

This article is from the "Breght Moon" blog, make sure to keep this source http://liqingbiao.blog.51cto.com/3044896/1688024

CactiEZ----Monitoring Windows Host server R2