Cainiao talks about how to install a perfect system

I believe that it is not difficult to install the system for those who are at the prawns level, but they just keep clicking "Next! However, it may be difficult for cainiao-level figures.
Today, we will take Windows XP installation as an example to tell you some experience in installing the system. I hope it will help you.
Before installing the system:
First think about the disk to which the system is attached, and then sort the disk. The sorting mentioned here is to save the useful files in another disk to prevent accidental deletion during formatting. In addition, if the hardware drive disk of your machine cannot be found, we recommend that you use the tool software to save the driver. Master windows optimization can do this.
Note that everything in my documents is counted in drive C. Don't forget to save the files in it.
The path of favorites varies with the system. Generally
Under Settings, there is a folder named after your machine login name. After opening it, you will see the favorites folder and copy it to another disk.
After completing these steps, you can install the system. Restart the computer and press DEL to enter BIOS settings. Some people do not know when to press the DEL key here, so they will tell you a stupid way. As long as you restart, you will always press it. In addition, because of the different motherboard manufacturers, the shortcut keys for entering the BIOS are also different. Some are F2, some are F10, and there are prompts at the low end of the screen during boot.
Do not make any changes after entering the BIOS, because the above items are very important. If you make a mistake, the system may not be connected. We only need to change the drive letter sequence when the computer starts.
It is hard to tell how to find this, because the BIOS settings will also vary depending on the motherboard. Generally, under the BOOT tag, you can use the optical drive to start the computer. There will be related prompts on the right side of BIOS settings. cainiao can follow the prompts. After the installation, do not rush to restart. Put the installation disk into the optical drive, and then press F10 to save and restart.
At this time, you should observe that the computer will first check the optical drive when starting, and a line of characters appears below the screen (the specific English forgot, sweat), that is, let you press any key to enter the disc to start. Click it. The system installation process starts when the optical drive starts to go crazy!
Installing the system:
When I look at the prompts on the screen, I almost don't need to introduce anything because they are all Chinese. First, you need to select whether to install the new OS or repair the system, choose to install the new OS, and then press F8 to agree to those Protocols. The drive letter selection interface appears.
Move the cursor to the drive letter you want to install with the keyboard up and down key. Press the "D" key and the system will prompt you that deleting the drive will delete all the data, regardless of it, press the "L" key to confirm the deletion. After the process is complete, the screen is displayed. Then, select "Install Windows XP on the current disk" (which is not in the original text) and press Enter. The system prompts you to format the disk. Select "quick NTFS mode" for formatting. The formatting interface is displayed. When the progress bar reaches 100%, the computer starts to automatically mount the installation file in the optical drive, about 8 minutes later (depending on the speed of the optical drive), the system restarts automatically.
Note: In this case, you need to remove the installation disk from the optical drive, in order to avoid automatically reading after the reboot.
After restarting, go to the installation page again. At this time, place the installation disk and install it again. You almost don't need to make any settings. Click "Next. However, there is a serial number input process in the middle.
This process takes about 40 minutes, and some information about windowsXP functions will be displayed on the screen. Please pay attention to it. After the installation is complete, the system prompts you to remove the installation disk. After you take it out, restart it. By the way, the BIOS will change the boot sequence back to hard disk boot, and the installation process will basically be completed.
After installing the system:
Generally, after entering the system, drivers of commonly used hardware have been installed, but not all. In this case, you need to install it yourself. First, check which drivers are not installed on the machine! Right-click "my computer", select "properties", and click "Device Manager" in the "hardware" tab ", if there is a question mark icon in front of the device, it indicates that the device is faulty. Double-click and follow the prompts above to install the driver. Until all the preceding question marks disappear.
Drivers to be installed generally include graphics cards, sound cards, NICS, and cats. Some advanced machines also have drivers for infrared, Bluetooth, and other adapters.
Below are some optimization settings for the system. If your machine configuration is not high, we recommend that you do as I said.
1>
Right-click the screen and select "properties ". Click the "appearance" tab, select "windows classic style" from the "appearance and button" drop-down menu, and then adjust the screen resolution in uppercase according to your preferences in the "Settings" tab, generally 1024*768. If you are using a common CRT display, click the "Monitor" label and adjust the "screen refresh frequency" to "85Hz". Click "OK! Does the screen look more comfortable?
2>
Right-click the taskbar and select "properties". In the "Taskbar" tab, select the check box before "show Quick Start. Click the "Start" menu, change the menu class to the "classic" start "menu, and click" OK "to see if the menu is more comfortable? (Hey, my personal feeling !)
3>
Right-click my computer and select the "advanced" tab. Click "set" in the performance item. In the visual effect item, click "adjust to optimal performance", and then select "use common tasks in Folders" in the option below ".
In this step, click the "advanced" label next to "visual effect" and click "set" in "Virtual Memory. In the open attribute box, first move the cursor to drive C, click "non-paging file" below, and then click drive D (which disk space is larger on your machine ), enter a value in the Custom size, click "set" next to it, and then click "OK.
The virtual memory should be set based on the memory capacity! Generally, this is 1.5 times the memory capacity!
4> right-click "my computer" and select the "System Restore" tab. If you don't need it, select "turn off System Restore on All Drives". This is not required by anyone!
5>
At this time, you will find a "shield" icon at the system tray in the lower-right corner of the screen, which is the security center of Windows XP. Double-click it to enable "firewall" and "virus protection" when you have not installed your own anti-virus software. In this way, the security will be relatively higher!
6> after doing this, click "start" and select "Windows Update". At this time, IE is automatically opened to connect to the windows upgrade website. Follow the prompts above to upgrade the website. The steps are required! After the upgrade, you may need to restart the computer.
7>
Open any folder, click "Tools" in the menu bar, and select "Folder Options ". Click the view tab, remove the "Do Not cache thumbnails", "Remember the view location of each folder", and "display prompt information when you point to a folder or desktop item" class. Click "apply to all folders" at the top and click "OK!
8> right-click IE and select "properties". In the "General" tab, click "Use blank page" and click "OK!
　　
Last words
At this point, we have basically finished introducing the new-user installation system, but I would like to remind you of the following points:
1>
Anti-virus software must be installed, updated frequently, and regularly disinfected. Do not think that the website will not be poisoned if it is not in disorder.
2>
The system must be patched. Microsoft will release the patch in the second week of every month, and then update the patch as mentioned above.
3>
Do not randomly download and install software. Download links provided by many informal websites may be infected with viruses, or a bunch of junk software is bound. When downloading the SDK, check the options and remove the check box before unnecessary software.
4>
Do not modify computer settings or delete computer files.