CCNA Experiment four Open the Web Management Service of router

CCNA Experiment Four turn on the WEB Management Service for the router

Environment: Windos XP , GNS3.0.7

Objective: practice how to turn on the router WEB Management Services, through IE managing the Router

Steps:

1.First install the loopback Virtual network card on thephysical machine XP system , open the "Control Panel"-- Add Hardware to do the following

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288428865pzZC.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288428871nz40.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288428880P5G8.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288428889e8Tw.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288428899FLjK.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288428903ggCL.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_12884289173963.gif "/>

2 , open GNS build the following topology:

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288429209VhB2.gif "/>

then right-click Cloud " Loopback0 "Select the Configuration"

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288429264p8S8.gif "/>

then connect the device: right-click R1 Select the Modify Console Port "Note the value of the port: -

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288429310U55B.gif "/>

3. Open cmd command line input telnet 127.0.0.1- login to Router R1 for configuration:

router>en

Router#conf T

Router (config) #hostname R1

R1 (config) #ip http server// Open Routing HTTP service feature

R1 (config) #ip HTTP authentication local//For users who log in to the HTTP server locally authentication

R1 (config) #username kkfloat privilege Password [email protected]// set a user name kkfloat and password [email PR Otected], and be sure to set his level of entitlement to the router by using IE to log in .

R1 (config) #int fa0/0// Enter the interface to the Loopback connection fa0/0

R1 (config-if) #ip add 192.168.1.1 255.255.255.0// Assign an IP to fa0/0

R1 (config-if) #no sh// open fa0/0 interface

R1 (CONFIG-IF) #end// Exit interface mode

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288432269G9YR.gif "/>

4. Open IE on thephysical machine , enter fa0/0 IP Address:http://192.168.1.1 Test

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_128843237033R2.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_1288432381So7s.gif "/>

650) this.width=650; "src=" Http://hi.csdn.net/attachment/201010/30/0_12884323893F43.gif "/>

Now you can go through IE Zone management router.

This article from "Liu Fengyuan" blog, declined reprint!

CCNA Experiment four Open the Web Management Service of router