CentOS 7 load B120i driver

CentOS 7 load B120i driver
0. Go to the HP Raid configuration page and create a Raid Logical Disk.


1. Search for B120i download driver at www2.hpe.com
CentOS 7.2 can be downloaded directly: http://downloads.hpe.com/pub/softlib2/software1/pubsw-linux/p1903785255/v115075/hpvsa-1.2.14-113.rhel7u2.x86_64.dd.gz


2. Use the dd program to restore the drive file to the USB flash drive (here the U disk is mounted to/dev/sdb1)
Dd if = hpdsa-.. x86_64.dd of =/dev/sdb1


3. On the installation selection screen, Press ESC to enter the boot command line (the following parameters are used to remove the raid interference caused by ACHI)
Input: linux modprobe. blacklist = ahci inst. dd


4. After startup, the drive disk will be selected


1) Select the driver Mount directory (if the list is empty, refresh by r)
2) Select the driver by 1
3) Press c to continue and install the driver.
4) Remove the drive USB flash drive

5) Press c to start the installation program

5. After the CentOS installation interface is installed, follow the normal process