1. CentOS modify the IP address to modify the corresponding network interface IP address configuration file # vi/etc/sysconfig/network-scripts/ifcfg-eth0 modify the following content DEVICEeth0 # Description of the network interface corresponding to the device alias, for example, in the ifcfg-eth0 file it is eth0BOOTPROTOstatic...
1. modify the IP address of CentOS Modify the configuration file of the corresponding nic ip address
# Vi/etc/sysconfig/network-scripts/ifcfg-eth0 Modify the following content
DEVICE = eth0 # describe the DEVICE alias for the NIC, for example, it is eth0 in the ifcfg-eth0 file
BOOTPROTO = static # set the way for the NIC to obtain the IP address. the possible options are static, dhcp, or bootp, which respectively correspond to the IP address specified by the static state and the IP address obtained through the dhcp protocol, IP addresses obtained through the bootp protocol
BROADCAST = 192.168.0.255 # corresponding subnet BROADCAST address
HWADDR = 00: 07: E9: 05: E8: B4 # physical address of the corresponding Nic
IPADDR = 12.168.1.2 # If you set the method for obtaining the IP address from the NIC to static, This field specifies the IP address of the NIC.
IPV6INIT = no
IPV6_AUTOCONF = no
NETMASK = 255.255.255.0 # network mask corresponding to the network adapter
NETWORK = 192.168.1.0 # NETWORK address of the NIC
ONBOOT = yes # whether to set this network interface when the system starts. if it is set to yes, the device is activated when the system starts.
II. CentOS gateway modification Modify the gateway configuration file of the corresponding Nic
[Root @ centos] # vi/etc/sysconfig/network
Modify the following content
NETWORKING = yes (indicates whether the system uses the network, which is generally set to yes. If it is set to no, the network cannot be used, and many system service programs cannot be started)
HOSTNAME = centos (set the host name of the local machine. the host name set here must correspond to the host name set in/etc/hosts)
GATEWAY = 192.168.1.1 (set the IP address of the GATEWAY connected to the local machine. For example, the gateway is 10.0.0.2)
3. modify DNS in CentOS Modify the DNS configuration file of the corresponding Nic
# Vi/etc/resolv. conf Modify the following content
Nameserver 8.8.8.8 # google domain name server
Nameserver 8.8.4.4 # google domain name server
4. restart network configuration
# Service network restart Or
#/Etc/init. d/network restart Modify IP address Effective immediately:
# Ifconfig eth0 192.168.0.2 netmask 255.255.255.0 Start effective:
Modify
/Etc/sysconfig/network-scripts/ifcfg-eth0 Modify Gateway Default Gateway Effective immediately:
# Route add default gw 192.168.0.1 dev eth0 Start effective:
Modify
/Etc/sysconfig/network Modify DNS Modify
/Etc/resolv. conf The modification takes effect immediately and starts as well.
Modify host name Effective immediately:
# Hostname centos1 Start effective:
Modify
/Etc/sysconfig/network
Modify Nic configuration # Vi/etc/udev/rules. d/70-persistent-net.rules
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.