CentOS6.3 Connection Xshell problem (connection failed--need to set onboot= "yes" to turn on the NIC driver)

Small white Record:

After installing Xshell, connect CentOS6.3 baseservice version, not connected, service network Restart only two OK,

Baidu find information--Get the conclusion: after the network card is set, the default is not turned on, you need to set onboot= "Yes".

Begin:

Enter the system,

Landing

Enter Vi/etc/sysconfig/network-scripts/ifcfg-eth0,

Note: After VI there is a space,

then enter

Then use the arrow keys to move the cursor to the back of the onboot (of course, I have modified this, before it is no, has now been modified to Yes),

Then press the I key to perform the modification (as we normally enter text in text and delete text, the modified interface is INSERT), after the modification is completed, press Esc key to exit,

After you need to save, press: Wq After pressing ENTER will be OK,

Then the service network restart effect is as follows

Reference: https://zhidao.baidu.com/question/429929795.html

Thank you for the answer.

CentOS6.3 Connection Xshell problem (connection failed--need to set onboot= "yes" to turn on the NIC driver)