China Mobile G3 with Eline 3G wireless network card ZTE-T A356 Internet solution

Note that the following configuration file only applies to ZTE ZTE-T A356 devices, other models need to modify the PID and vid.

Download the driver attachment (g3ewalk-linux.tar.gz) and run the following command to decompress the file/Etc/Directory:

 
$ SudoTar-Zxvf g3ewalk-Linux.tar.gz-C/Etc/
 

Run the following command:

$ Mkdir~/G3ewalk
$ Tar -Zxvf g3ewalk-Linux.tar.gz-C ~/G3ewalk
 

Disable the LAN ethernet card before dialing:

$ SudoIfconfig eth0 down//Enable LAN Ethernet Card: sudo ifconfig eth0 up
 

Perform G3 dialing contact:

 
$ Sudo~/G3ewalk/G3
 

Echo prompt:

Write by ishagua@www.pc-pub.com

Loading new driver. Please wait for 10 seconds...

Modprobe usbserial vendor = 0x19d2 Product = 0x0079...

Dialing...

Pon 3G...

Wait 10 seconds to complete dialing...

After dialing, start your pleasant online trip.
 

The dial light turns green and becomes successful :)

Refer:
[1] http://www.pc-pub.com/article-721-1.html
[2] http://forum.ubuntu.org.cn/viewtopic.php? F = 116 & t = 307397 & START = 0