Cisco AP 1200 Upgrade iOS
First open the Cisco TFTP tool, then connect the console line, reboot into: mode,
AP:?
To see if the SET command is supported, it is generally supported and then configured as follows, similar to the router
Configure IP Address
ap:set ip_addr 1.1.1.1 (Configure AP Local address)
Ap:set NETMASK 255.255.255.0
Ap:set Default_router 1.1.1.2 (tftp address)
Ap:tftp_init
Ap:Boot=tftp://1.1.1.2/c1200-k9w7-mx.123-2.ja
You can look at the set situation
Ap:set
Boot=tftp://1.1.1.2/c1200-k9w7-mx.123-2.ja
default_router=1.1.1.2
Enable_break=yes
ios_static_ip_addr=1.1.1.1
ios_static_netmask=255.255.255.0
ip_addr=1.1.1.1
Manual_boot=no
netmask=255.255.255.0
Then the manual boot
Ap:boot
Loading "Tftp://43.82.33.2/c1200-k9w7-mx.123-2.ja"...########################################################################################################### ############################################################################################################### ############################################################################################################### ################################
file "Tftp://43.82.33.2/c1200-k9w7-mx.123-2.ja" uncompressed and installed, entry point:0x3000
Executing ...
Restricted rightslegend
Use, duplication, or Disclosure by the Government are
subject to restrictions as set forth in subparagraph
(c) of the commercial computer software-restricted
Rights clause at far sec. 52.227-19 and subparagraph
(c) (1) (ii) of the rights in Technical D ATA and computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System software
IOS (tm) C1200 software (c1200-k9w7-m), Version 12.3 (2) JA, RELEASE Softwa RE (FC2)
Technical support: Http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Mon 08-nov-04 12:47 by Ccai
Image text-base:0x00003000, data-base:0x0064854c
Initializing FLASHFS ...
FLASHFS[1]: 138 files, 7 directories
Flashfs[1]: 0 Orphaned files, 0 orphaned directories
FLASHFS[1]: Total bytes:7741440
FLASHFS[1]: Bytes used:1149440
FLASHFS[1]: Bytes available:6592000
FLASHFS[1]: Flashfs fsck took 2 seconds.
FLASHFS[1]: Initialization complete....done Initializing FLASHFS.
This product contains cryptographic features and was subject to
States and local country laws governing import, export, transfer and
Use. Delivery of Cisco cryptographic products does not imply
Third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users is responsible for
Compliance with U.S. and local country laws. By using the This product
Agree to comply with applicable laws and regulations. If you are unable
To comply with U.S. and local laws, return this product immediately.
A Summary of U.S. laws governing Cisco cryptographic products is found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance, contact us by sending email to
[email protected].
Cisco AIR-AP1220-IOS-UPGRD (POWERPC405GP) processor with 14326k/2048k bytes ofmemory.
Processor Board ID VDF0652Q0WL
POWERPC405GP CPU at 196Mhz, revision number 0X00C4
Last Reset from power-on
Bridging software.
1 Fastethernet/ieee 802.3 interface (s)
1 802.11 Radio (s)
32K bytes of flash-simulated non-volatile configuration memory.
Base Ethernet MAC Address:00:0b:be:b0:03:b7
Part number:0-0000-00
PCA Assembly number:000-00000-00
PCA Revision Number:
PCB Serial NUMBER:VDF0652Q0WL
Top Assembly Part number:000-00000-00
Top Assembly Serial Number:
Top Revision Number:
Product/model NUMBER:AIR-AP1220-IOS-UPGRD
Press RETURN to get started!
*mar 1 00:00:05.828:%link-3-updown:interface fastethernet0,changed state-to-up
*mar 1 00:00:06.829:%lineproto-5-updown:line protocol oninterface FastEthernet0, changed state-to-down
*mar 1 00:00:14.749:%lineproto-5-updown:line protocol oninterface FastEthernet0, changed state-to-up
*mar 1 00:00:24.967:%sys-5-restart:system restarted--
Cisco Internetwork Operating System Software
IOS (tm) C1200 software (c1200-k9w7-m), Version 12.3 (2) JA, RELEASE Software (FC2)
Technical Support:Http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Mon 08-nov-04 12:47 by Ccai
*mar 1 00:00:24.967:%SNMP-5-COLDSTART:SNMP agent on host AP isundergoing a cold start
*mar 1 00:00:25.007:%dot11-6-freq_scan:interface dot11radio0,scanning Frequencies
*mar 1 00:00:25.928:%lineproto-5-updown:line protocol oninterface BVI1, changed state-to-up
*mar 1 00:00:25.980:%lineproto-5-updown:line protocol oninterface dot11radio0, changed state-to-down
*mar 1 00:00:26.988:%dot11-6-freq_scan:interface dot11radio0,scanning Frequencies
*mar 1 00:00:27.011:%dot11-6-freq_scan:interface dot11radio0,scanning Frequencies
*mar 1 00:00:48.294:%dot11-6-freq_inuse:interface dot11radio0,frequencies in use:2412 2437 2452
*mar 1 00:00:48.294:%dot11-6-freq_used:interface dot11radio0,frequency 2422 selected
*mar 1 00:00:48.298:%link-3-updown:interface dot11radio0, changedstate to Up
*mar 1 00:00:49.299:%lineproto-5-updown:line protocol oninterface dot11radio0, changed state-to-up
ap>en
Password:
ap#。。
You can edit this command on your notepad later.
ap#
ap#conf T
Enter configuration commands, one per line. End with cntl/z.
AP (config) #
AP (config) #boot sy
AP (config) #Boot Systemtftp://43.82.33.2/c1200-k9w7-mx.123-2.jaAP (config) #do WR
ap#Reload
Proceed with reload? [Confirm]
Radio system:delayed or multiple reload request, ignored
Radio system is preparing for reload ...
Radio system is a ready for reload.
*mar 1 00:01:43.081:%sys-5-reload:reload requested by console. Reload reason:reload command. Xmodem file system is available.
Flashfs[0]: 139 Files, 7 directories
Flashfs[0]: 0 Orphaned files, 0 orphaned directories
FLASHFS[0]: Total bytes:7741440
Flashfs[0]: Bytes used:1150976
Flashfs[0]: Bytes available:6590464
Flashfs[0]: FLASHFS fsck took 9 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC Address:00:0b:be:b0:03:b7
Initializing Ethernet Port 0 ...
Reset Ethernet Port 0 ...
Reset done!
Ethernet link up, MBS, Full-duplex
Ethernet Port 0 Initialized:link is up
Loading "Tftp://43.82.33.2/c1200-k9w7-mx.123-2.ja"...########################################################################################################### ############################################################################################################### ############################################################################################################### ################################Sample Text
This article is from the "I am small white" blog, please be sure to keep this source http://94770228.blog.51cto.com/8591938/1739539
Cisco AP 1200 Upgrade iOS or recovery