Company A Cisco asa5505 collapsed, fortunately there is a standby machine, but before the other people have used, do not know the login password, so take out the console line access to the standby 5505, re-power, press ESC at startup, then the prompt Rommon #0 >
The value of the configuration register is 0x41 Rommon #0 >confreg 0x41
Enter reboot, restart the device Rommon #1 >reboot
The process of entering a password is skipped after restarting the device
See the Prompt ciscoasa>
Change Password
Ciscoasa>enable
Password:
Ciscoasa#configure Terminal
Ciscoasa (config) #enable password xxx
Change the value of the register to 0x01
Ciscoasa (config) #config-register 0x01
Restore factory settings
Ciscoasa (config) #configure Factory-default
Save current configuration
Ciscoasa (config) #exit
Ciscoasa#copy Running-config Start-config
Overload
Ciscoasa#reload
You can say 650) this.width=650; "src=" Http://img.baidu.com/hi/jx2/j_0057.gif "alt=" J_0057.gif "/>
This article is from the "KKMM" blog, make sure to keep this source http://lisiyun.blog.51cto.com/2779132/1682267
Cisco ASA 5505 Password reset