Cisco Port aggregation +windows service NIC configuration instance

Steps:

1 , the configuration of the Cisco switch

Create a new link aggregation channel port in privileged mode and add the port to the Vlan

        sw2960 ( config ) #intport-channel 1 ( Span style= "Font-size:14px;color: #3F3F3F;" > According to the actual situation fill in channel

sw2960 ( Config ) #switchport Access Valn

Configure the ports to join the link aggregation

Interfaceg1/0/1

Switchportaccess VLAN 20

CHANNEL-GROUP6 Mode Active

Interfaceg2/0/2

Switchportaccess VLAN 20

CHANNEL-GROUP6 Mode Active

2, inServeron Open"Server Manager", click"enabledNICCombination"

1. on the taskbar of the group, select " New Group "

2. Define group name Select the network card to which you want to join the group, select the group mode on the other properties "LACP" , the load Balancing mode is dynamic.

3. When you have completed the above options, observe if the NIC in the adapter column is active.

3. Check

See if the aggregation was successful on the switch through the show etherchannel summary command.

Cisco Port aggregation +windows service NIC configuration instance