Cisco-pix515e-r-ike Configuration Sample

The following are specific configurations:

PIX version 6.3 (1)//Os I used version 6.3, this version supports IPSec VPN with NAT

Interface Ethernet0 Auto

Interface Ethernet1 Auto

Nameif Ethernet0 outside Security0

Nameif Ethernet1 inside security100

Enable password 8ry2yjiyt7rrxu24 encrypted

passwd 2kfqnbnidi.2kyou Encrypted

Hostname issc-pix515e-r

Fixup protocol FTP 21

Fixup protocol h323 h225 1720

Fixup protocol h323 RAS 1718-1719

Fixup protocol HTTP 80

Fixup protocol ILS 389

Fixup protocol Rsh 514

Fixup protocol RTSP 554

Fixup protocol sip 5060

Fixup protocol sip UDP 5060

Fixup protocol Skinny 2000

Fixup protocol SMTP 25

Fixup protocol sqlnet 1521

Names

Access-list Permit IP 192.168.10.0 255.255.255.0 192.168.32.0 255.255.255.0

Access-list 102 Permit IP 192.168.10.0 255.255.255.0 192.168.32.0 255.255.255.0

Access-list permit ICMP any any

Pager lines 24

MTU outside 1500

MTU Inside 1500

IP address outside 10.0.0.1 255.255.255.0

IP address inside 192.168.10.252 255.255.255.0

IP Audit Info Action Alarm

IP Audit Attack Action Alarm

IP Local Pool PCCW 192.168.32.1-192.168.32.10

IP Local Pool pccw02 192.168.32.50

PDM history Enable

ARP Timeout 14400

Global (outside) 1 interface

Nat (inside) 0 Access-list 102//VPN-connected users without NAT, here's 102 corresponds to the above Access-list 102

Nat (inside) 1 192.168.10.0 255.255.255.0 0 0

Access-group in interface outside

Route outside 0.0.0.0 0.0.0.0 202.108.48.181 1

Timeout Xlate 3:00:00

Timeout conn 1:00:00 half-closed 0:10:00 UDP 0:02:00 RPC 0:10:00 h225 1:00:00

Timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 Sip_media 0:02:00

Timeout Uauth 0:05:00 Absolute

Aaa-server tacacs+ Protocol tacacs+

Aaa-server RADIUS Protocol Radius

Aaa-server Local Protocol Local

Aaa-server Partnerauth Protocol Radius