Configuration purpose: The Register configuration is used to change the router startup process.
The start bit is made up of 4-bit 16-digit registers
Format: 0xABCD
Assignment range from 0x0 to 0xFFFF
0X2102: Industrial Default value
0x2142: Starting from flash, but not using the configuration file in NVRAM (for Suwa foment? LT;BR/>0x2101: Booting from boot RAM, applied to update system files
0x2141: Booting from boot RA m without using the configuration file in NVRAM
Where the third digit of the C bit is 1, the break key is turned off, whereas the break key is turned on.
0x141: Closes the break key, does not use the configuration file in Nvram, and from the system default ROM
System to boot.
0X0040: Indicates that the routing gas is allowed to read the configuration file in NVRAM.
Monitoring command Features
O: Displays the actual configured currently functioning registers in a bit form,
o Displays the virtual configuration register, currently in effect, WI
Th a description of the bits
O/R: Resets the actual configured registers to the following values:
9600 (port rate)
Whether the break is valid
Whether to ignore configuration in NVRAM
Whether to start from ROM
such as: O/R 0x2102
Table B-1 Register Configuration definition Table
位顺序 十六进制 意义
00 to 03 0x0000 to 0x000F 启动字段
06 0x0040 使得系统软件忽略NVRAM中的内容
07 0x0080 OEM位开启
08 0x0100 Break键关闭
10 0x0400 IP广播到所有域
11 to 12 0x0800 to 0x1000 Console口速率
13 0x2000 如果网络启动失败,默认从ROM中启动
14 0x4000 IP broadcasts do not have net numbers
15 0x8000 启动诊断信息同时忽略NVRAM内容(1) Industrial default register bit 0x2102. This only consists of the following parts
bit = 0x2000, bit 8 = 0x0100, and bits 00 to 03 (reference TableB-2) = 0
x0002.
Table B-2 Start for gaze (configuration register bits 00 to 03)
The meaning of starting bit
0x0: Stay in Bootstrap state after starting
0x1: Booting from ROM
0x2 to 0xF: Specifies the default boot file boot system.
Table B-3 console port rate setting table速率 12位 11位
9600 0 0
4800 0 1
1200 1 0
2400 1 1