Cisco Static routing Configuration

Source: Internet
Author: User

First, switch mode

router>en//user mode enable

Router#conf t//Privileged mode configure terminal

Second, start the interface, assign IP address

Router (config) #interface fa0/0//Configuration mode ..... assigning IP addresses to f0/0 ports

Router (config-if) #ip address ports as gateways, subnet masks are set as needed, typically with default subnet masks

Router (config-if) #no shutdown//interface mode

Router (config-if) #exit

Third, configure static routes

Destination network subnet mask (destination) next-hop address

Router (config) #ip Route

Iv. Inspection

Show IP interface Brief//display port IP

Do show IP route//show Route

Cisco Static routing Configuration

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.