Cisco switch Configuration Zone

1. Configure zoneswitch#conf Tswitch (config) #zone name zonename1 Vsan 10 Create Zone;switch (config-zone) #member interface FC1/1 #将需要的 Port join Zone1;switch (config-zone) #member interface FC1/3 #将需要的端口加入zone1, switch (config) #no zone name zone1 vsan 100 Remove zone; .................................................................................................................. 2, configuration zonesetzonesetswitch#conf tswitch (config) # zoneset name Zonesetname1vsan #创建zoneset, that is, Config;switch (config) # Member Zonename1 #将zone join Zoneset;switch (config) #memberzonename2switch (config) #zoneset activate name zonesetname1 Vsan #激活zoneset, if not activated, the Switch SFP module port light is on, but the storage can not find the path, and config, after adding a zone, it is necessary to activate;

This article is from the "BOM water Year _" blog, please be sure to keep this source http://timefiles.blog.51cto.com/8475652/1794694

Cisco switch Configuration Zone