Cisco X4516 upgrade CF card

Note: The device iOS and configuration files need to be backed up before upgrading.

4506a#show version

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ipbase-m), Version 12.2 (a) SG3, RELEASE

Cisco WS-C4506 (MPC8245) Processor (revision 4) with 524288K bytes of memory.

Processor Board ID Fox081302z5

MPC8245 CPU at 400Mhz, Supervisor V

Last Reset from PowerUp

1 Virtual Ethernet Interface

Gigabit Ethernet Interfaces

511K bytes of non-volatile configuration memory.

Engine: ws-x4516 (now the engine is Sup8+universalios, but do not rule out the older devices will be encountered)

1. Insert CF card with the following tips

*APR 8 23:37:37.775:%filesys-5-cflash:compact Flash card inserted into slot0

2, Switch#dir slot0:

Directory of slot0:/

2-rw-8369 APR 9 06:35:55 +00:00 4506-oa-server_config

3-rwx 18086076 APR 9 06:37:15 +00:00 Cat4500-entservices-mz.122-54.sg1.bin

3, copy Slot0:cat4500-entservices-mz.122-54.sg1.bin bootflash:

4. Boot System Flash Bootflash:/cat4500-entservices-mz.122-54.sg1.bin

5. Copy Slot0:4506-oa-server_config Running-config

WR Mem

6, Reload

This article is from the "unrestrained" blog, please be sure to keep this source http://keep11.blog.51cto.com/1443840/1770136

Cisco X4516 upgrade CF card