CISCO65 Switch Series FWSM firewall module login password reset

The default boot partition for the FWSM module is cf:4, and the maintenance partition is CF Yes: 1
By default, the FWSM boots from Cf:4.

To reset the FWSM login password step:
1. Restart the firewall module in cf:1 mode to enter the FWSM maintenance partition
# hw-module Module Mod_num Reset cf:1
2. Enter the FWSM template via the session command
# session Slot Mod_num processor 1
3. Log in to the FWSM maintenance partition default account is Root/cisco, after entering the FWSM maintenance system can be cleared by the clear relevant command to reset the relevant password
# clear passwd cf:4 (reset FWSM login password)
Output the following format:
[Email protected] #clear passwd cf:4
wish to erase the passwords? [Yn] y
The following lines is removed from the configuration:
Enable password 9kpcnpn94rlu8z encrypted
passwd 0jwol8mwsnsul Encrypted
Want to remove the commands listed above from the configuration? [Yn] y
Passwords and AAA commands have been erased.

4. After resetting the relevant password, exit the FWSM maintenance system and restart the firewall module in Cf:4 mode to enter the FWSM operating system.
#hw-module Module 4 Reset Cf:4

5. After the firewall module restarts stably, the default account Cisco/cisco can enter the FWSM operating system.
#session Slot 4 Processor 1
The default escape character is ctrl-^ and then X.
You can also type ' exit ' at the remote prompt to end of the session
Trying 127.0.0.41 ... Open
User Access Verification
Password:cisco
Type help or '? ' for a list of available commands.
Fwsm-hz> en
Password:cisco
fwsm#

Reference Address:
http://sns.clnchina.com.cn/space.php?uid=364772&do=blog&id=4614

Welcome Lai Qun 1,666,846,201 Exchange

This article is from the "Network around us." Blog, so be sure to keep this source http://willy.blog.51cto.com/5093185/1715391

CISCO65 Switch Series FWSM firewall module login password reset