Cobbler Web interface operation (iv)

Add Systems

1. Start adding system systems

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6F/5F/wKioL1Waao-BXQ9qAAGXb1ftp-Y388.jpg "style=" float: none; "title=" 13.png "alt=" Wkiol1waao-bxq9qaagxb1ftp-y388.jpg "/>

2, edit the General tab, add the system name, select the corresponding profile

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6F/61/wKiom1WaaMPyfKWYAALDFoFHp-c371.jpg "style=" float: none; "title=" 14.png "alt=" Wkiom1waampyfkwyaaldfofhp-c371.jpg "/>

3. Edit the Networking (Global) tab, add the hostname of the installation host, add the address of the DNS server (the gateway is not added within the Global tab)

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6F/5F/wKioL1WaapCQokPGAAJcAwjb8Tw218.jpg "style=" float: none; "title=" 15.png "alt=" Wkiol1waapcqokpgaajcawjb8tw218.jpg "/>

4, edit the networking tag, add interface eth0 (this interface named in the CENTOS7 there is a change, but the system interface generated will automatically capture the system recognized name), add the interface MAC address, add IP, selected interface type, configuration subnet mask and interface gateway.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6F/61/wKiom1WaaMPSEZ6bAANZKIc91w0196.jpg "style=" float: none; "title=" 16.png "alt=" Wkiom1waampsez6baanzkic91w0196.jpg "/>

5, edit the power management tag, this can be associated with IPMI, ILO and other out-of-band management interface, through the input IP, user name and password can be cobbler to the server to restart the operation, easy to install the system.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6F/5F/wKioL1WaapDAOOKKAAJ0BtqbPO0096.jpg "style=" float: none; "title=" 17.png "alt=" Wkiol1waapdaookkaaj0btqbpo0096.jpg "/>

6. Re-install system

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6F/62/wKiom1WabRmTe4dRAAJWiZsZ-SE441.jpg "title=" 20.png "alt=" Wkiom1wabrmte4draajwizsz-se441.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6F/61/wKiom1Waa-6ClyUdAAIHBWFUbIE455.jpg "style=" float: none; "title=" 18.png "alt=" Wkiom1waa-6clyudaaihbwfubie455.jpg "/>

Indicates that if the server is setting up a PXE boot, the reinstallation system will reboot the system from PXE boot mode as the server starts

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6F/5F/wKioL1WabbrgdPkKAAJC7hEIpPY548.jpg "style=" float: none; "title=" 19.png "alt=" Wkiol1wabbrgdpkkaajc7heippy548.jpg "/>

If this system server has an out-of-band management interface such as IMPI or ILO, you can reload the system by cobbler the server for reboot.

7, after the system reload (NetBoot enabled label to disappear, indicating that the reload is successful, the next time the server restarts will skip PXE boot)

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6F/62/wKiom1WabdLTXqonAAHt8OdldKc956.jpg "title=" 21.png "alt=" Wkiom1wabdltxqonaaht8odldkc956.jpg "/>

This article is from the "zhanguo1110" blog, make sure to keep this source http://zhanguo1110.blog.51cto.com/5750817/1671436

Cobbler Web interface operation (iv)