Collection: Comprehensive WinRAR practical skill Series

WinRAR can also manage my desktop for a long time. There are too many things on the desktop. How should I manage it at ordinary times? If you have installed WinRAR, you can ask it for help and use it to clear useless desktop files or icons.

Take the XP system as an example. The directory where the system is located is "C:/WINDOWS". Assume that the User name is "User", and the icons and files on the desktop are in "C: /Documents and Settings/User/Desktop Folder. Determine the icons and files to be saved on the desktop, and write a file list in notepad, such:

C:/Documents and settings/User/desktop/qq. lnk

After the file list is created, save it as the "d:/cleandesklist.txt" file and select the "cleandesk" file, under the "file" menu in the System window, select the "shortcut" command in "new", and enter in the "Create shortcut" window "Enter the project location: "c:/program files/winrar/winrar.exe" a-x @ d:/clean1_list.txt-df-r d:/cleandesk/desk.rar "C: /Documents and settings/User/desktop /*. *". This command is used to compress the table file into the folder named "..rar" and then delete the original file.

Hosts file. Double-click the "Desktop Management" link and check the files and icons on the desktop. In addition to the List and system icons, other icons or files are automatically cleared. If you find that the file zookeeper .rar is correct or not, you can open it to restore it.

Seven Tips for batch WinRAR operations

1. Batch convert compression formats

After a few steps, you can batch convert zip, ARJ, Ace, cab, ISO, and other compressed files on the hard disk to files in RAR and zip formats.

Run WinRAR, switch the directory to the folder that saves the compressed file, select the compressed file to be converted by pressing CTRL and shift in the file list, and click "Tools → convert file format ", in the window shown in "1", click "Browse" next to "folder for storing converted Files" to select a folder, press the "OK" button to convert multiple types of compressed files to the RAR format.

If you want to convert files to zip files in batches, click the "compression" button. The window shown in 2 is displayed. You can select the converted compression type as RAR or zip, you can also set other parameters such as compression ratio and volume splitting.

Tips

Click WinRAR "file → select a group" and enter "*. RAR "or other file extensions (3), WinRAR will help you automatically select all the rarfiles in the current folder. However, this method is accumulative, that is, we perform the above operations multiple times, you can select multiple formats of files at the same time. If you want to cancel the selection of a file of a certain format, select "file → undo select a group" (or press the-number on the keyboard), and then enter the file name, you can unselect this type of file from the selected file.

Ii. Batch Delete useless files in a compressed package

The author has a folder dedicated to storing articles, storing files of various periods and categories. After WinRAR compression, the compressed package is amazing. After careful inspection, I think it is possible to delete the TIF and BMP image files that occupy the major volume, but only keep the files in them. Obviously, because there are a lot of folders and layers, if one file is deleted, the workload will be astonishing, and the main challenge of batch is that the image files are distributed in different folders in the compressed package, if they can be displayed at the same time, the operation will be much more convenient.

Step 1: Clear all files

Double-click the compressed package and select "option> file list> flat folder View" in the window (or press the shortcut key: Ctrl + H ). All files in the compressed package are displayed in the window.

Step 2: Quickly select the desired file

Click "File> select a group" and enter *. tif. Then, enter *. bmp to select all TIF and BMP files. Click the "delete" button on the WinRAR toolbar. After a while, these files will be deleted from the package.

3. Batch weight loss for compressed packages

If you often need to delete files in a compressed package in batches, the above method still seems to be a little inadequate. Here we recommend another more efficient method-the command line method.

Step 1: Create a batch file

Create a clean. bat file and enter the following content:

FOR/r % v IN (*. rar) DO winrar d % v *. tif *. bmp-r-ibck

Step 2: Copy necessary files

Copy all files to the folder (If Windows 2000 is used, copy them to C:/Winnt ).

Step 3: Execute the batch processing file

Copy the clean. bat file to the RAR folder to be sorted. Double-click the BAT file to delete all TIF and BMP images in the compressed package in batches.

Tips

Enter "FOR/r % v IN (*. rar) DO winrar d % v *. tif *. bmp *. tmp *. bak-r-ibck can also delete TMP and BAK files from the RAR package, sort out the compressed package, and reduce the weight for the compressed package.

Use WinRAR to solve encrypted folders

Tell you a little secret about WinRAR. Many friends need to encrypt their own folders, and most of them convert the folder to be encrypted into a system folder (such as the Control Panel) to protect the folder. If Super Rabbit has this function, you must have used it.

When I was using WinRAR, I suddenly saw all the files in the folder I encrypted with the folder encryption software. Ah, no, right? So I went to the encrypted folder and checked it out. That's right, and I still have a password! Open the folder and display the control panel content! Return to WinRAR, And the encrypted folder is exposed here. The problem persists after repeated verification.

From this point of view, those seamless folders disguised by encryption software have to show their original shape under WinRAR. Now, you know this, should you be better off for your folder?

Use WinRAR to merge MP3 music

As more and more friends are paying attention to PS and webpage creation, it is not uncommon to edit and merge an image. However, it is still a blind spot for many friends to edit and merge a song, A person with a higher level may choose professional audio editing software such as GoldWave and CoolEdit. A friend with a lower level may have to "sigh with Hope" most of the time. In fact, many of the software we use at ordinary times contain some small functions that can meet our simple audio editing needs. For example, the tips for merging MP3 songs that we will introduce to you today are as follows, it is achieved through our most commonly used WinRAR compression software.

Step 1. Put all the MP3 songs to be merged into the same folder and arrange them in the desired playing order, because the merged songs will be played in this order.

Step 2. Select all pre-merged song files, right-click and select the "WinRAR → add to compressed file" command.

Step 3. This is also the focus of the entire setup! In the pop-up window, set the compression method to "Storage" (that is, do not compress, because the internal structure of a song will be chaotic once it is compressed, at this time, even if the music is merged, the playing software cannot play it correctly), change the file name extension in the "compressed file name" column to MP3, and click "OK.

Step 4. Upload a new file named "Song" under the original song file. Double-click it and try again to see if it is exactly the same as what you need?

Use WINRAR to create your own secret space

WinRAR is a well-known File compression software. It is powerful and easy to operate. It has never been inferior to WinZip and other compression software. Now it is a trend to replace WINZIP as the compression software's leader. In addition to the basic compression and decompression functions, WINRAR also has many simple, convenient and practical functions. Let's use it to create our own secret factory today!

In many cases, we often use various encryption tools to encrypt important materials or documents that require confidentiality. In fact, WINRAR can be used to achieve this easily. The following describes how to encrypt an important text file A. TXT:

1. Find A large BMP image (other formats are acceptable) and copy it to. TXT folder and name it B. BMP: select A with the left mouse button. TXT file, and then select B. BMP file, right-click and select "add to file ()... ".

2. In the pop-up window, change the extension from RAR to BMP in "compressed file name", and change the default "standard" to "Storage" in "compression mode ", that is, no compression is performed.

3. Click "file" to open the dialog box and check whether the image file in the "file to be added" is in front of the text file. If not, you must change it.

4. Click "advanced". In the displayed dialog box, select "set password", select "show password" and "encrypted file name", and enter the password in "Enter Password. To increase the security of encryption, you can enter Chinese characters as the password.

5. Click "OK" twice to merge A. TXT to the. BMP file.

6. Encrypted images can still be viewed using Image Browsing tools, which are exactly the same as those before they are merged, people who do not know the secret will never think that our secret document will be hidden in an image. Even if you use an image encryption tool similar to penetration, you can find hidden text in the image, but because we chose the encrypted file name and the file itself during the merge, others do not know that the password cannot be opened, and the file name in the encrypted document cannot be seen. Is it very confidential!

7. If you want to view the document, you can change the file name extension to RAR and use WinRAR to open the file. You can also use WinRAR to open the image file, then enter the password we set.

After the above processing, WinRAR was used to create our own secret factory. I am afraid there is no software to crack our secret!

WinRAR makes it run faster

The most typical practice of extracting files in rar format is to double-click the compressed file, and then click the extract to button to bring up the WinRAR program, then, "OK" can be decompressed to the current folder with the same name. It would be nice to see the brown progress bar quickly move forward. However, if the rarfile to be decompressed is large, we can only wait. Although you can select the "backend" running mode, it is still working.

Open WinRAR, click "Options> Settings", and then select the "path" tab. Do you see the "temporary file decompressed folder" at the top? That is, it delays our time, because when RAR starts decompression, it temporarily places the extracted file in the "C:/docume ~ 1/Raye/locals ~ 1/temp/"(this item varies with machines of different users) in the Temporary Folder, after decompression, cut them to the destination folder we selected (generally, this rarfile is the same as the banner folder? . In general, because we extract files from a non-system disk C, and WinRAR uses the default Temporary Folder C, we can shorten this process, let WinRAR directly put the extracted file in the root directory of the partition where the rarfile is located, and the speed is certainly faster. The method is very simple: Use a backslash "/" (excluding double quotation marks) to replace the "C:/docume ~ 1/Raye/locals ~ 1/temp. When We decompress some large RAR compressed files later, we will feel a little faster.

WinRAR also supports smart backup

For every computer user, data backup is undoubtedly not negligible. Generally, we simply copy important data to a specific place. However, when the data to be backed up is distributed in different folders, simple replication will be troublesome. Second, maybe only one of the files in a folder has been modified, but we also copy the entire folder, which will waste a lot of time. In view of these inconveniences, many professional backup software emerged. We have to pay a registration fee when learning to use the software. In fact, one of our commonly used software can easily implement smart backup, saving us a lot of trouble. This is WinRAR. In addition, through cooperation with some common features in Windows, you can reach a higher application level. Let's talk about how to use this commonly used compression software to intelligently back up and update data.

1. First, we need to clarify which files and folders need to be backed up. For example, I need to back up a working folder (in D:/LJ/work), a folder (in D:/Foxmail/mail), and a private file (in D: /LJ/private file ). The installation path of WinRAR is C:/program files/WinRAR. The following uses my folder as an example. You can change the folder based on your actual situation.

2. Create a backup list file (with 1st as the suffix ). The content of this file is the path of the data to be backed up. I created a text file named mybackup.1st in the backup folder (D:/lj/back) under my directory to store mail information and work file information. Enter D:/lj/work // backup work folder D:/Foxmail/mail // backup foxmail letter D: /lj/private file // back up my private files

(Note: before this file, it is a file or folder for WINRAR to be backed up. "//" is followed by a comment on the previous project, which does not affect the file. The backup list file name can be started at will, but the suffix cannot be changed)

In fact, data on other machines in the LAN can also be backed up on the local machine. In this case, you need to write the full path of the file or folder to be backed up in this list file, for example, // computer1/d/lj/work. Note that you must first log on to the machine or do not need to enter the network password. Otherwise, WinRAR will refuse to compress because the password cannot be provided.

The hosts file, and then add: a-ep2-ibck d:/lj/back/backup.rar @ d:/lj/back/mybackup.1st (each command should have a space) that is, the final command line should be: "c:/program files/WinRAR/WinRAR.exe" a-ep2-ibck d:/lj/back/backup.rar @ d:/lj/back/mybackup.1st

Name the shortcut "backup ". Double-click this shortcut, and WINRAR will automatically read the files and folders to be backed up in the backup.1st file in the background. a vertical line on the WINRAR icon indicates the backup process, and automatically back them up to the d:/lj/back/backup.rar file.

The parameter in the preceding command line indicates that "A" indicates adding the specified file and folder to the compressed package; "-EP2" indicates that the complete file path is stored during compression; "-ibck" indicates running WinRAR in the background. Note that the hyphen before "-EP2" must be a minus sign in English. In fact, there are more command parameters available for us to use, for example,-p1234 can set a password 1234 for the backup file and so on. You can search in the WinRAR help file.

4. the above operations only involve a simple backup of important data, far from being intelligent. Because we are working every day, data is constantly changing, so we must update data frequently. Of course, you can click the "backup" shortcut to update the backup, but it takes too much time to re-back the backup. We can ask WinRAR to find the modified file and update it. The specific operation is as follows: copy the "backup" shortcut on the desktop and rename the copied shortcut to "backup Update ". Right-click the file and change the command line to "C:/program files/WinRAR/winrar.exe" U-y-ibck D: /LJ/back/backup.rar @ D:/LJ/back/mybackup.1st "), and confirm. In this way, you only need to double-click the "backup Update" shortcut on the desktop before leaving work to update and back up the above files to achieve data synchronization.

If you back up data before shutting down, you can add the command "-ioff" to the command line above, that is, change the command line to "C: /program files/WinRAR/winrar.exe "U-y-ibck-ioff D:/LJ/back/backup.rar @ D:/LJ/back/mybackup.1st. In this way, every time you double-click the shortcut, the computer will automatically shut down after the data is backed up and updated in the background. Is it intelligent?

Now, we can easily back up and update important data. In fact, with the combination of common Windows features, we can make backups more intelligent. For example, you can add the created backup update shortcut to the scheduled task in Windows and specify the running time for it to implement the scheduled backup function; you can also drag the shortcut to "start"> "program"> "start" with the left mouse button to automatically update the backup at each boot. More functions are available. We look forward to exploring them!

Make WinRAR that can sing

For ease of use, we may make the RAR package into a self-extracting file. The self-extract module provided by WinRAR is easy to use, but it looks boring. In fact, you can make a WinRAR self-extracting interface that is distinctive and sound-colored by simple transformation, so that your friends can envy it.

Recognize the true face of the Self-extracting Module

Go to the WinRAR installation path and you will see several files with the suffix "SFX". They are WinRAR's self-extracting modules (figure 1 ). Find "Default. SFX" and copy it as a backup to remedy the problem after the operation fails. You can change its suffix to "EXE" and run it (figure 2 ). It looks like a normal WinRAR self-extracting file. It is actually a shell used to package WinRAR compressed files. because it does not contain any files, "the compressed file format is unknown or damaged" is displayed ". Now, we should be clear that the self-extracting file interface is determined by "Default. SFX". If it is modified, the self-extracting file can be changed.

Since "Default. SFX" is an executable program, the problem is simple. Both the common tools of the Chinese software, exists and resource hacker, can view and edit the resources of the executable program. Open it with resource hacker and try to view its dialog box resources. An error message is displayed (Figure 3 ). It seems that this file has been compressed (also known as shelling ). Using tools such as ASPack, UPX, and pecompact to compress an EXE file does not affect its usage, but it can reduce the file size and prevent file cracking or resource modification. Currently, resource hacker cannot be used to view resources in "Default. SFX". This is the reason.

You cannot determine which software is used for compression. Therefore, you need to use the tool software peid for analysis. Open "Default. SFX" with peid and show that it has been compressed by the UPX tool (Figure 4). Therefore, you must first decompress it (Shell); otherwise, you cannot modify it. Use UPX shell to open "Default. SFX" (UPX shell is a graphical interface program of UPX, through which you can conveniently call UPX to complete various operations) and select extract (figure 5 ).

Make-up and fade-in, transform the appearance

Use resource hacker to open the decompressed "Default. SFX", and now the resources are displayed correctly (figure 6 ). Start with the "dialog box" and you can see that each sub-item contains three resources: "1028" for traditional Chinese resources, "1033" for English resources, and "2052" for simplified Chinese resources. To reduce the size of the self-extracting module, delete all the resources in Traditional Chinese and English. Similarly, useless Traditional Chinese and English string resources can also be removed.
Figure 6:

Next, we will replace the icons and bitmap resources. The icon resource is the icon displayed in the Self-extracting file in the Windows system, while the bitmap resource is the image displayed on the Self-extracting main interface. We can find some favorite images and icons to replace the default resources. The image must be in BMP format (256 colors) and can be customized. However, it is recommended that the image size not exceed 400x227 or 227x400 pixels. Otherwise, problems may occur. The icon format is ICO, four styles are required (16 × 16 @ 16 colors, 16 × 16 @ 256 colors, 32 × 32 @ 16 colors, and 32 × 32 @ 256 colors ). After preparing these resources, use exists to open "default. SFX file, select the resource to be replaced, click "import" to replace the file, and confirm it when prompted to update the file (figure 7 ).
Figure 7:

Easy prompt

The size of Bitmap resources has a great impact on the size of the self-extracting module. If the image size of the Self-extracting module is too large, the size of the compressed file will increase a lot after it is converted to the self-extracting file, this will affect its practicality.

Next let's take a look at the resources in the dialog box. Press the "F12" key to preview (Figure 8). You can confirm that "asknextvol" is the prompt for extracting the package, and "getpassword1" is the password for inputting the decompression, "licensedlg" is the installation protocol dialog box, "renamedlg" is the rename dialog box, "replacefiledlg" is the replacement file dialog box, and "startdlg" is the main interface of the Self-extracting module. Obviously, you need to modify "startdlg" and "licensedlg ".
Figure 8:

Select startdlg and press F8 to open the dialog box editor ". Click the object element, and adjust its size and position through the real-time mouse operation (figure 9 ). If you want to make fine adjustments (such as alignment), you can enter a specific value directly above the window on the right of exists. You can also modify text information directly in the title. In addition, we can also set the resource layout. If you do not want the text description, you only need to cancel its visible attributes (Figure 10 ).

During the modification process, it is important to note that the size of the image box cannot be smaller than that of the previously set bitmap resource. Otherwise, the image is incomplete, affecting the overall effect. It is not accurate to the naked eye. Is there a good solution to this problem? The answer is yes. For example, the size of a bitmap is 176 pixels wide and 209 pixels high. After dividing it by 1.5, It is 117 and 140, you can set the size of the image object to 117x140 directly in excoder (figure 11 ). Make sure that the object type is correct when you modify the size to avoid errors. Through continuous modification, the self-extracting module interface has been completely refreshed (figure 12 ). There are many similarities between "LICENSEDLG" and "STARTDLG", but there are few object elements. Therefore, you can follow the instructions in "STARTDLG" to modify them. We recommend that you use the same layout for a uniform style.

So far, the self-extracting module has been basically modified. To further highlight its personality, you can also mark the self-extracting module with exclusive information, such as the home page and email box. Use Resource Hacker to open the "Default. SFX" file, right-click the Resource "STARTDLG" in the dialog box, and select "insert control" (figure 13 ). Click "label" or select "STATIC" from the pre-defined control drop-down list, and fill in the information you want to display in the title position (figure 14 ). If there are multiple rows, you can add them separately. After adjusting the size and position of the control, click the "compile script" button (figure 15) and save and exit.

Next, start the test. The specific process is to place the self-extracting module in the WinRAR installation directory, and then create a self-extracting file to test whether the self-extracting module works properly (figure 16 ). In some cases, the Resource Hacker cannot be used after saving the Resource. In this case, you only need to delete the faulty module and use the module (Default_original.SFX) that is automatically backed up before saving the Resource) change the name and then modify it. After the test is satisfactory, use UPX Shell to compress the modified module. Generally, the compression ratio can reach about 50%, and the volume has been greatly reduced. Copy the compressed module to the WinRAR installation path again. If the test is correct, congratulations!

Easy prompt

Rename the modified self-extracting module to "Default. SFX", and overwrite the file with the same name in the WinRAR installation directory. This allows you to use it directly, reduce the process of selecting a module, and streamline the operation steps.
Icing on the cake and adding music

The visual effect has been completed. Next we will add the auditory effect. Find a suitable music file as the background music of the Self-extracting file. The file format can be MP3 or Midi. Considering the file size, we recommend that you use the MIDI format. If you really want to use the MP3 format, it is best to extract a section and reduce the bit rate to control the file size.

Select the files and folders to be compressed, right-click them, and select "add to compressed file". In the displayed dialog box, select "create compressed file in self-extracting format" (Figure 18 ), after filling in the file name, click "self-extract options" on the "advanced" page ". Switch to the text and Icon page, and fill in the following information in the text displayed in the Self-extracting file window (figure 19 ). Since the installation script of WinRAR supports some HTML formats, this part of content is processed as HTML.

┌ ── ─
│
│ ...... The information here can be customized ...... │
│ ...... Enter relevant information as needed ...... │
│
│
└ ── ─

"Embed src =" Midi. mid "" specifies the name of the background music file. "autostart =" true "" indicates that the music file is automatically played. "width" and "height" indicate the width and height of the control panel, if the two are set to "0", the playback control panel will not be displayed, damaging the overall appearance. Click "OK" twice to generate the self-extracting file.
Then, select the background music file "midi. mid" and the generated self-extracting file, and package it into a self-extracting file again. Fill in the file name, and click "self-extract option" on the "advanced" page ", in the "decompress and run" input box on the "General" Page, fill in the Self-extracting file name generated in the first package (Figure 20 ). On the "Mode" Page, select "unpack to Temporary Folder", "hide all", and "overwrite all files" (Figure 21 ), click the "OK" button twice to obtain the final self-extracting file (this mode should be used with caution, and some Trojans on the network are spread in this way ).

Run the self-decompressed file. After a moment, we will see the custom self-decompressed interface. At the same time, there is a beautiful background music coming out of the speaker, and we will make such a self-decompressed file and send it to our friends, proudly tell them, "My WinRAR will sing!"

 

Easily create WINRAR self-extracting files with one click

WinRAR is a commonly used tool on Windows. I found that many people use it to create compressed files and self-extracting files, which are very difficult to understand. WinRAR provides a template-like function. Here I call it a configuration file. With this function, Most compressed files can actually be completed with one click.

Let's first look at how several people create self-extracting files.

Step 1: select the file for which you want to create a self-extracting file, right-click the file, and select "add to compressed file" from the shortcut menu to open the "compressed file name and Parameters" dialog box, on the "General" tab, select the "Create compressed file in self-extracting format" check box.

Step 2: switch to the "advanced" tab of the "compressed file name and Parameters" dialog box, and click "self-extracting options" on this tab to open the "Advanced Self-extracting options" dialog box.

Step 3: In the "Advanced Self-extracting options" dialog box, set various options for the Self-extracting file, such as the decompression path, decompression mode, and icon of the Self-extracting file. After setting, click "OK" to close the "Advanced Self-extracting options" dialog box, and click "OK" again to close the "compressed file name and Parameters" dialog box, in this way, WinRAR can create a self-extracting file for the selected file.

Obviously, using the above method to create a self-extracting file is very troublesome. Next, we will create a template for creating a self-extracting file, that is, creating a configuration file for the Self-extracting file (such a configuration file can be used for life after it is created ).

After setting various options for the Self-extracting file in step 3 above, click "OK" to return to the "compressed file name and Parameters" dialog box, on the "General" tab of the dialog box, click "configuration" and select "save current settings as new configuration" from the drop-down menu ", in the displayed dialog box, set the new configuration command to "Create a self-extracting file" (1), and click "OK" to save the new configuration.

Now we can use the configuration file created above to create a self-extracting file:

Select the file for which you want to create a self-extracting file, right-click it, and select "add to compressed file" from the shortcut menu to open the "compressed file name and Parameters" dialog box, on the "General" tab, click "configuration", select the saved configuration file "create self-extracting file" from the drop-down menu, and click "OK, winRAR creates a self-extracting file for the selected file based on the options set in the configuration file. Is it much simpler than the above method.

In the same way, we can also create the following configuration files.

Creating a compressed file with a password: This configuration file can add a pre-configured password to the compressed file. When you want to create an encrypted compressed file, select the file to be compressed, right-click, select "add to compressed file" from the shortcut menu, click "Configure" in the displayed dialog box, and select "create compressed file with password, after you click OK, WinRAR compresses the selected file into a compressed file with a password.

Contains compressed files with recovery records and locked. This configuration file can be used when you need to publish important files to the network. This configuration file locks the generated compressed file to prevent modification by others. In addition, the compressed file created with this configuration file also includes recovery records, in this way, if a compressed file is damaged after being downloaded, the file can be repaired. In addition, for the convenience of transmission, the maximum compression ratio is used for this compressed file (as shown in Figure 2 ), this is related to the configuration file.

Finally, let's talk about the default configuration file and preset configuration file of WinRAR.

In my Resource Manager, select the 06.doc”file and click the right button (marked as "3"). If you select the '06.rar 'command, WinRAR uses the "Default Configuration" configuration file to compress the file. The "Default Configuration" configuration file uses the "standard" compression method. To save disk space, we change it to the "best" compression method. Open WinRAR, select "option> Settings" on the menu bar to open the WinRAR "Settings" dialog box, and switch to the "compression" tab, click "create default configuration" to open the "Set Default compression options" dialog box (4), select "best" from the "compression mode" drop-down list box, and click "OK" twice ". In this way, when we use the "Default Configuration" to compress the file, the File compression ratio will be maximum.

TIPS: there are six compression methods for WinRAR: the compression ratio of "Storage" is "0", and the compression speed of "fast" and "fastest" is faster, but the compression rate is low, the "standard" method is WinRAR's default compression method. The "good" and "best" compression speed is slow, but the compression rate is high.

In addition to the "Default Configuration" configuration file, WinRAR has preset other configuration files, such as "Create E-mail attachments" and "backup selected files ", create "ZIP compressed files" and other configuration files. These configuration files are all set with corresponding compression options based on the purpose of the compressed files. When you create these compressed files, you do not need to set the compression options one by one, directly using these configuration files can greatly improve the efficiency of your work.

Tip: Manage configuration files: Open WinRAR and select "option> Settings" on the menu bar to open the WinRAR "Settings" dialog box, on the "compression" tab, click "manage configuration" to open the WinRAR "manage configuration" dialog box (5 ), in this dialog box, you can edit and delete WinRAR configuration files.

WinRAR nine secrets (recommended)

Confidentiality 1: Pay attention to dangerous self-extracting programs
I believe that we have seen many articles about the use of WinRAR to bind Trojans. We recommend that you save the executable attachment files. Then, right-click it and select the WinRAR menu. If the "open with WinRAR" command is available ●, this program is a self-extracting program. In this case, you can change the file extension from EXE to RAR. Double-click the file and use WinRAR to open it, which is much safer.

Secret Technology 2: Enable WinRAR to work "exclusively"
When editing files in a package, do not close the package window. Otherwise, you cannot save the changes to the file. In addition, if you double-click to open another RAR package, WinRAR may automatically close the compressed package in which you are modifying the file, so that you cannot update the modification, therefore, we recommend that you press Ctrl + S in the WinRAR window to cancel the "reuse existing window" check box under the "General" tab.

Password 3: File compression size I Xianzhi
Open the WinRAR window, select the file to be compressed, click the "information" button on the toolbar, and click the "Estimate" button in the window that opens, winRAR provides data such as compression ratio, package size, and time required to compress the file, which is very useful for compressing large files or folders. If you want to click the "info" button each time and WinRAR will automatically evaluate the file in the future, you can also select the "auto start" option.

Password 4: fast drive replacement
Press Ctrl + D to display the list of all the drives on the machine in the WinRAR window. You can click the mouse to quickly enter the corresponding drive.

Secret 5: create folders in batches
If you are working, you often need to create many identical folder structures (such as when backing up data ). So we can make WinRAR complete the tedious work: first create multiple folder structures (including subfolders) in "Resource Manager", then select and right-click these folders, select WinRAR> "add to compressed file", select the check box before "Create a self-released file" under "compression options" in the displayed setting window, and click "OK. Rename the generated exefile as folders.exe. To create a description folder under which the folder is located, just copy the folder to the folder, double-click folders.exe, and click "Install.

MIIT 6: Do not change my settings
Start notepad and enter the following statement:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE/SOFTWARE/WinRAR/Policy]
"Menu" = dword: 00000000
"Settings" = dword: 00000000
Save it as the limitrar. reg file, double-click it, and import the REG file to the Registry. When WinRAR is started, you will find that the menu cannot be used, and you cannot press Ctrl + S to bring up the "Settings" and "select toolbar button" windows, which is much safer.
Tips
★Change 00000000 in the preceding statement to 00000001 and save it as unlim. reg. Double-click to import the unlim. reg file to restore the menu and use the "Settings" window.
★The Menu item is set to 0/1, which is used to disable/allow the WinRAR main Menu, and the Settings item is set to 0/1, which is used to disable/allow the "set" and "select toolbar button" dialog boxes.
★If you are using Windows 9x/Me, change the preceding Windows Registry Editor Version 5.00 to REGEDIT 4.

Secret Technology 7: Quickly decompress the specified file in the RAR compressed package
If you want to decompress the specified file in the RAR package, you can open the rarfile and select "option"> "file list"> "flat folder View ". All files in this RAR package will be displayed (including in the corresponding folder). In this case, just click the corresponding button like in "Resource Manager, such as name, size, type, modification time, and path, all files in the RAR package can be sorted at a glance. After sorting by file type, press Ctrl or Shift to select the specified file, and drag and drop the file to the folder to decompress it quickly. Press Ctrl + H to cancel the flat folder viewing mode.
Tips
Switch the RAR package to the flat folder view mode, and then click the "type" button to place all types of files in the package together (such as all. tmp file), first select the first file, hold down the Shift key without releasing, then click the last file, select the corresponding file, and press the Del key to delete the same type of files in the RAR package.

Secrets 8: batch conversion of compressed packages
If you want to convert all the compressed packages into RAR packages by hand, you can do this: first put these compressed packages in a folder, such as C:/compress. Select the C:/compress folder in WinRAR. Click "command"> "Convert compressed file", and select the "delete original compressed file" check box in the displayed window, click "OK" to convert them into RAR packages. ●. By using this method, you can convert ZIP, CAB, ARJ, ACE, TAR, BZ2, UUE, GZ, LZH, and other compressed packages into RAR formats.

Secret 9: important files, do not delete
After a file is deleted from the RAR package, WinRAR automatically updates the file, and the deleted file cannot be found again (not in the recycle bin ). Therefore, if the compressed package is not modified or is important, select the compressed package (do not double-click it) and press Alt + L, in the displayed window, check the "prohibit modification of compressed files" check box and click "OK" to lock the package. The files in the package cannot be modified or deleted.
This command only supports RAR compressed files. At the same time, when compressing files, the setting window also has a "lock compressed files" check box ● once selected, the generated compressed package cannot be modified, it is useful for backing up important data.