1. Standard resistance: RES1, RES2. Package: AXIAL-0.3 to AXIAL-1.0
Two-port variable resistors: RES3, RES4. Package: AXIAL-0.3 to AXIAL-1.0
Three port variable resistance: resistor tapped,pot1,pot2; Package: VR1-VR5
2. Capacitance: CAP (nonpolar capacitance), ELECTRO1 or ELECTRO2 (polar capacitance), variable capacitance Capvar
Package: RAD-0.1 to RAD-0.4, polar capacitance of rb.2/.4 to rb.5/1.0.
3. Diode: DIODE (ordinary diode), DIODE Schottky (Schottky diode), Duide Tunnel (tunnel diode) DIODE Varctor (varactor diode) zener1~3 (Zener diode)
Package: DIODE0.4 and diode 0.7; (the above has been said.) Note that when making PCB, do not forget to change the port of the package diode to a, K)
4. Transistor: NPN,NPN1 and PNP,PNP1. Pin Package: TO18, to92a (ordinary transistor) to220h (high power transistor) TO3 (High power Darlington)
The above package is a triangular structure. The t0-226 is a straight line, and the 9013, 9014-pin arrangement We often use is straight. So the general transistor is used TO-126!
5. Effect Tube: JFETN (n-channel junction FET), JFETP (P-channel junction FET) MOSFETN (n-channel reinforced tube) MOSFETP (P-Channel reinforced tube)
The PIN package is in the same form as the transistor.
6, inductance: inductor, INDUCTOR1, INDUCTOR2 (ordinary inductor), inductor VAR, INDUCTOR3, INDUCTOR4 (variable inductance)
8. The BRIDGE1 and BRIDGE2 are often used in the bridge schematic diagram, and the PIN package is in the D-series, such as d-44,d-37,d-46.
9. Single-row multi-pin sockets the often used name in the schematic is the Con series. From CON1 to CON60, the pin package form is SIP series. From SIP-2 to SIP-20.
10. The names commonly used in the schematic of a dual-inline element are different depending on the function. Pin Package Form Dip series,
It is not as DIP40 as the 40-pin single-chip microcomputer package.
11. The name commonly used in the serial and class schematic diagram is the DB series. The PIN package is in the form of DB and MD series.
12, Crystal oscillator: Crystal. Package: XTAL1
13, light-emitting diode: LED. Encapsulation can only be used in a capacitor. (rad0.1-0.4)
14, LED digital tube: DPY; As for the package well, I recommend myself!
15, Toggle switch: SW DIP; What kind of package needs to be done by the distance of their feet!
16, Button switch: SW-PB: Package Ibid. You need to do it yourself.
17, transformer: TRANS1--TRANS5;
Common elements of Altium designer electrical symbols and packages