Common solutions to fault of CDMA wireless network card

Now a lot of business people, white-collar families are inseparable from wireless internet, on the map of convenience! Bought the Internet card, fee card, but in the installation process appeared problems, how to solve it? The following list of some of the problems of wireless network card solutions, I hope to help you.

Reason 1: You are not plugged in to the network card and run the software directly.

WORKAROUND: Close the SOFTWARE, insert the network card, and the software will run automatically.

Reason 2: There are other applications running on the network card, such as HyperTerminal, or already running the wireless Internet card software.

Solution: Close the relevant software.

No R-uim cards.

Reason 1: R-uim card not inserted.

Workaround: The R-uim card could not be inserted correctly or the reverse is wrong.

The reason 2:uim card is damaged, can use the CDMA handset to authenticate.

Solution: May be the card R-uim card block damaged.

Dial-up failed

Reason 1: User name, password, phone number setup error.

Workaround: Click Settings, click Restore Settings

Reason 2:r-uim owe fee.

Solution: Call the Unicom Hotline consultation.

Reason 3: Network congestion or failure.

Workaround: Redial later.

A network that is not registered in dialing.

Reason 1: May be online card in the Internet status "If you call, immediately click on the Internet, often this phenomenon"

Workaround: Redial, and you'll be successful.

Reason 2: The signal is too weak.

Solution: Use mobile phone to detect local network signal, or check whether the antenna is plugged in, or check the signal strength indication.