1, access to privileged mode, global configuration mode, interface configuration mode, virtual terminal configuration mode, RIP routing protocol configuration mode
Router > Enable
Password:
Router #
Router # Configure Terminal
Router (config) #
Router (config) # int F0/12
Router (config-if) #
Router (config) # line vty 0 15
Router (config-line) #
Router (config) # Router RIP
Router (Config-router) #
2. Configure Remote login Password
Router (config) # line vty 0 15
Router (config-line) # password 7 Isncgyx
3. Copy configuration file to tftp Server
Router # Write Network
4. Copy Running-config to TFTP Server
Router # copy Running-config tftp:
5, copy the configuration file in Bootflash to the TFTP Server
Router # Copy Bootflash:tftp:
6, from the TFTP Server copy configuration file to the router
Router # Copy Tftp:running-config
7, copy the configuration file on the TFTP Server to Bootflash
Router # Copy Tftp:bootflash:
8, configure the router's host name
Router (config) #hostname ROUTER-ISNC
9, configure the root user password
Router (config) # enable secret Isncgyx
10, set the system clock
Router # Calendar Set 11:30:00 October 2011
11, Save the configuration
Router # Write memory
Router # Write Network tftp
12, delete the configuration
Router # Write Erase
13, Basic Detection command (telnet, ping, trace)
Router > Telnet paris/221.4.8.1
Router > Ping 192.168.201.64
Router > Trace 210.38.160.5
Router > Traceroute www.yourtion.com
14, see Flash, System clock, software and hardware version, router configuration, view the routing table, IP routing protocol details
Router > Show Flash
Router > SH Clock
Router > SH version
Router # SH Configuration
Router # SH IP route
Router # SH IP protocols
15. Configure Interface Description Information
Router (config-if) # description to-jiaying University
16. Configure interface Bandwidth
Router (config-if) # bandwidth 2500,000
17, configure the interface IP address
Router (config-if) # IP address 202.112.7.249 255.255.255.252
18, the opening and closing of the interface
Router (config-if) # shutdown/no shutdown
19. Do not act as ARP agent
Router (config-if) # Duplex ful
l# no IP directed-broadcast
# no IP proxy-arp
20. Configure Asynchronous Serial Interface
Router (config) # interface A1
Router (config-if) # IP unnumbered ethernet0
Router (CONFIG-IF) # Encapsulation PPP
Router (config-if) # async Default IP address 202.112.7.129
Router (config-if) # async Dynamic Routing
Router (config-if) # async Mode Interactive
Router (config-if) # no shutdown
Router (config-if) # exit
Router (config) # exit
Router (config) #
21. Configure High speed Synchronous serial interface
Router (config) # interface S1/1
Router (config-if) # description To-shenzhen
Router (config-if) # bandwidth 2048
Router (config-if) # IP address 212.112.41.81 255.255.255.252
Router (config-if) # encapsulation HDLC
Router (config-if) # no IP directed-broadcast
Router (config-if) # no IP proxy-arp
22. Configure POS Interface
Router (config) # interface pos3/0
Router (config-if) # Description to Tianjingdaxue
Router (config-if) # bandwidth 2500,000
Router (config-if) # IP address 212.12.37.18 255.255.255.252
Router (CONFIG-IF) # CRC 32
Router (config-if) # pos Framing SDH
Router (config-if) # no IP directed-broadcast
Router (config-if) # POS flag S1 S0 2
23, the Loopback interface configuration
Router (config) # int loopback 0
Router (config-if) # IP address 192.167.167.9 255.255.255.255
Router (config-if) # no IP route-cache
Router (config-if) # no IP mroute-cache
24. Configure Static routing
Router (config) # ip route 192.65.96.0 255.255.240.0 222.112.37.1 (configuration of static routes)
25, into the RIP configuration mode
Router (config) # Router RIP
26. Set up the network address to participate in RIP protocol
Router (config-router) # network 159.105.0.0
27. Configure the passive interface of RIP
Router (config-router) # Passive-interface Ethernet 0
28, configure the RIP routing filter
Router (config) # access-list deny any
Router (config) # Router RIP
Router (config-router) # distribute-list in Ethernet0
29, configure the management distance RIP
Router (config-router) # Distance 50
30, configure the RIP neighbor router
Router (config-router) # neighbor 202.112.7.2
31. Configure a single IP address to participate in OSPF
Router (config) # Router OSPF 63
Router (config-router) # network 131.107.25.1 0.0.0.0 area 0
32, network address participation in OSPF
Router (config-router) # network 133.181.0.0 0.0.255.255 Area 0
33. Define subnet addresses to participate in OSPF
Router (config-router) # Area 0 Range 212.37.123.0 255.255.255.0
34, configure the passive interface (including routers and the configuration of the third tier switch)
Router (config-router) # passive-interface Ethernet 0
Router (config-router) # Passive-interface Vlan37
35. Configure Routing Filtering
Router (config) # access-list deny any
Router (config) # Router OSPF 63
Router (config-router) # Distribute-list in serial 0
36, configuration management distance
Router (config-router) # distance 10
37. Configure the cost value of OSPF to introduce external routes
Router (config-router) # Redistribute metric 100
38. Configure the default tag value when introducing external routes
Router (config-router) # Redistribute Tag 10
39. Configure the default external route type when importing external routes
Router (config-router) # Redistribute connected Metric-type 1 subnets
40, configure the name of the IP address pool
Router (config) # ip dhcp pool ttt/234