Common method for configuring ADSL Wireless Router

ADSL Wireless Router settings: Nic TCP/IP protocol settings

Right-click "Network neighbors" on the desktop, and select "properties" in the pop-up menu. In the displayed network dialog box, under the "configuration" tab, select "TCP/IP ......" (The ellipsis varies depending on your computer's network adapter.) Click properties"

The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "IP address" tab. Enter the IP address of the NIC, for example, 192.168.1.14, and subnet mask 255.255.0 (the IP address in this example is used to be consistent with the factory address of ADSL. You can set the adsl ip address on the configuration screen as needed)

Select the "Gateway" tab, enter the IP address 192.168.1.1 of the Gateway (which is the default address of ADSL), click "add", select the "DNS configuration" tab, and select the "Enable DNS" option. In the "DNS server search" sequence bar, enter the IP address of the DNS server, and click "add" to add it to the above settings for WIN9X system. Let's look at the WINNT system!

Step 2: The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "IP address" tab. Enter the IP address of the network adapter, for example, 192.168.1.14, subnet mask 255.255.0, and Gateway: 192.168.1.1, which is the default value of Modem), and then enter the IP address of the DNS server.

Click OK to return to the network dialog box. Click the confirm button in the networks dialog box to exit 9X system to restart the machine, NT system is not needed, suitable for DB102DB102-ADB102-BDB108VroSetting method. After the network adapter is set up, open the browser and type http: // 192.168.1.1; in the address bar ;. Enter the User Name admin and password dare. This is the default value. If you cannot enter this value, contact your local dealer and telecom)

ADSL Wireless Router settings: WAN settings

1-7 "virtual circuits" are closed. Here, we take the 1 virtual circuit as an example. The method is to select 1 in the "virtual circuit" in the "WAN" Settings and press "Submit ", select "enable", select "NO", and then press "Submit" to complete the process. This is also done for others.

Set "enable" of 0 virtual circuit to "Yes"

Set the VPI and VCI values. Could you tell me the local telecom)

For dynamic routers, select "PPPoELLC" in "Encapsulation Format". For static routers, select "1483BridgedIPLLC" in "Encapsulation Format"

Select "Disabled" in the "bridge" option"

In the PPP "User Name" and "password" columns of the dynamic router, type "User Name" and "password" (the specific value is specified by the DSL service provider) enter "static IP Address", "subnet mask", and "Default Gateway" for the static router (the specific value is specified by the DSL service provider)

Click "Submit" in the lower part of the page to save the setting value.

ADSL Wireless Router configuration: LAN Configuration

The parameters on this page can be left unspecified. Keep the default configuration.

ADSL Wireless Router settings: NAT configuration

Set "NAT" to "NAPT ". Click Submit to save the settings.

ADSL Wireless Router settings: Save configurations

The configuration of the ADSL Wireless Router is coming to an end. You only need to click "Save settings" in the user configuration bar to go to the "Save ADSL Wireless Router Settings" page. Click "Submit" to save all the above settings. ADSL will automatically restart and run according to the set parameters. Note: VPI and VCI must be correct!