Common router port ing methods

Next, we will discuss common methods of router port ing. Hope to help you! To download the BT file in the LAN of A vro。, You need to enable the router port ing. The specific method varies with the vro brand and model. The following describes how to set up the MR804 router for my mercury account:

◆ Open IE and fill in 192.168.1.1. If both the user name and password are admin, fill in and change the password ).

◆ Open the forwarding rule entry on the page, select the virtual server, set the service port to the multicast port number, set the ip address to the ip address of the local machine, and select ALL for the Protocol. Click Enable.

◆ Enable upnp settings.

◆ Change the windows Firewall settings.

◆ Select an exception and check the upnp framework and Funplayer options.

If it is a router of another brand ...... I don't know! If the person reading this article is different from yours, go online and try again! How do I set router port ing for two wireless routers? Wireless routers, router port ing, set the wireless router to connect to the model is tengda, enable the DHCP server to pull a line from the LAN port on the Tenda router and connect it to another wireless router (the mercury 54M router ).

Set the IP address of the mercury router to 192.168.0.99 (the tengda router is 192.168.0.1, And the DHCP address pool is from 10-100). Set the NIC of the notebook of the mercury router to 192.168.0.11 ~ 192.168.0.98 subnet mask 255.255.255.0 (Both routers are the same) the gateway address is 192.168.0.1.

If this is set, you can access the Internet normally, but you cannot add a port on the settings page of The tengda router... other places cannot find the place where the router port ing is set (the IP address shown in the figure is indeed my IP address). Try to add a port on the mercury router, and you still cannot enable port ing.

Simply direct the address of the DMZ server to my IP address on the tenta router port ing... still not working... I X and direct the DMZ server to my IP address in the Mercury router... still not working... in the past, a MODEL with a routing function in the home had the routing function enabled. After connecting to this mercury router, port ing can also be enabled (set in the MODEL ...), A long time ago, I had a tengda router (wired). I can also enable port ing... where did I make a mistake?