Common ways to quickly restore BIOS initialization settings

Bios,basic input output system, that is, the basic input and exportation systems, it holds the computer's most important basic input and output of the program, system settings information, power-on on the Self-Test program and the system to start the bootstrap process. If the setting is slightly improper, the computer can not start normally, sometimes when the computer fails, you can also choose to restore the factory settings to solve the problem, then how to restore the bios of the factory settings? Let the master tell you.

To quickly restore the BIOS factory setup steps:

Method One:

1, on the computer, when the first screen information appears, according to the information at the bottom of the screen prompts, such as "Press DEl Enter BIOS", "Press F1 to Run Setup" information, according to the corresponding key to enter the BIOS program interface.

2. In the BIOS interface, move the cursor to the "Load optimized Default" entry and press ENTER.

3, then in the pop-up window select "OK" and press ENTER to achieve the Restore factory settings.

Method Two:

1, is the motherboard button battery removed, and maintain more than 15 banknotes, and then installed up, you can eliminate the BIOS information, so that it restores factory settings.

2, of course, some motherboards are also configured with "Hard jumper", only need to press the tip of the jumper cap will be "2" and "3" pin short, you can achieve the elimination of BIOS information functions.

The above is a master to teach you two simple steps to restore the BIOS factory settings, if you want to install the system, or the computer encountered a failure, you can easily restore the BIOS factory settings through the above steps, reset the BIOS.