Complete introduction to Nero ultra-engraved DVDRip movies

Many people want to add their favorite DVDRip movies. However, after a movie file is added with a subtitle file, they can burn a M Disk in a normal way, and then the ultra-engraved disc is very important.

Preparations

1. You must set the parameters in Nero before burning. The setting method is as follows:
Choose File> Parameter options> General to adjust the red flag to 90 minutes.


2. Select the "expert functions" option page and select the functions that can be ultra-engraved.


3. Select "burn image file" from the "file" menu, click the burn button on the toolbar, and select "disk at once" under the burning mode.


4. At this time, Nero will remind you that the disk capacity is insufficient. Then, the following message will appear. Click "burn ultra-burned disc" to start burning.
Next, you only need to wait until the burning ends.

5. Note that the superburn function of Nero must be in disk at once mode.

Method

I. Disk Detection
If conditions permit, we recommend that you select some brand disks during purchase, because with the popularity of recorders, the selection of disk disks is also growing, A single unit price of around 2 yuan (varies by region) can choose some good brands, such as ritek (RE), BenQ/Acer (Acer), and unibit) and so on, because in fact there are just a few disc manufacturers, many of them use the OEM Brand again, for example: unibit (ubelt) is the OEM product of ritek (re de. A good brand of disk is not very good at flying disk, the storage time is also relatively long, an important point, do not pick a burner, so it is recommended to 50 or 100 units for a one-time purchase, can be a good bargain. At present, the price of 50 unibit (ubelt) Single-bucket A-class disc in Guangzhou is 1.6 yuan. For your reference.
After buying a disc, you need to know how many minutes and capacity the disc can be engraved. One of the simplest methods is to use the tools attached to Nero. The specific methods are as follows:
1. First put the blank CD-R disc in the recorder, and then select Nero CD speed in the Start Menu Program ()



2. Select the ultra-engraved disk from the drop-down menu ()


3. After the test window appears, you can also obtain the basic information about the disk, including capacity, time, manufacturer, and disk type. Select Start to start the test ()



4. the recorder will simulate the over-engraved process. Don't worry. If it is not actually burned in, a prompt box will appear, indicating that the total time of the disc can be over-engraved and more time than normal, and asked if you want to save the information. Optional. Yes. ()



5. Final plot: Green indicates the normal burned part, and yellow indicates the part that can be ultra-engraved. The following is a specific parameter. Choose close to close and exit. ()


After selecting a disk, the following describes how to burn it:

Ii. Burning

1. Open Nero. If any of the following images is displayed, exit the wizard ).


2. On the Nero menu bar, click "select Recorder" in "Burner ".


Then, a dialog box will pop out, which will show you whether the recorder has been correctly installed, whether it supports ultra-engraving, and other related information.
Note: Do not use ultra-click if it is not displayed, otherwise it will damage your disc and burner. If you are sure that your burner supports ultra-click, the above does not show support, it may be that your registration code is wrong, you can use the registration machine to calculate the correct registration code, re-enter it and then look at the situation.



3. Open "file" on the menu bar of Nero and select "preference settings ",



Then, in the dialog box that appears, select "class attributes" (some Chinese are called expert settings), enable the ultra-engraved function, and enter a number larger than 80 minutes, I usually use 99 minutes (of course, you can also enter a larger value, but now the market can be up to MB of ultra-capacity dial, can be written for 90 minutes, so 99 minutes is enough ).


4. Open "file" on the menu bar of Nero, open a new file, drag the content to be burned into the blank box, and select "file" on the menu bar of Nero to start burning the disc,


Jump out of the Option box and select "no multi-region" in "multi-region"


Then press "burn" to go to another option box and put "End Cd (this CD won't burn any more information !)" In this check, select "one-time CD installation (DAO)" in the writing method )"
Note: The write method can be activated only when "no multi-partition" is selected.
5. After completing the preceding steps, click "CREATE" next to "burn". If your data volume is larger than 703 MB, in 2 seconds, the following ultra-click dialog box will pop up. You only need to select "super-click" and you will be OK!