Comprehensive Understanding of the cause and solution of tengda router setup errors

I believe many people are not very familiar with the settings of the tengda vro. So I have studied the causes and solutions for the errors in the settings of the tengda vro. I will share them with you here. I hope they will be useful to you, I hope you will learn more from the article.

Why can't I log on to the tengda router settings page?

First, confirm that the vro and the computer have been correctly connected. Please refer to how to confirm that my computer and the router have been correctly connected) and have disabled/uninstalled all software firewalls. Then check the browser configuration. Open IE, go to the tool, Click Internet Options, and click connection. If you have created a connection, choose not to make a dial-up connection, and then click tengda router settings to clear all options. In Netscape, go to edit, click "Preferences", and enter "advanced". Are you sure you want to directly connect to the Internet is selected. Enter the IP address of the Broadband Router in the address bar of the browser, and press Enter To Go To The tengda router settings page. If you are using TEI6609A2, the failure to log on to the interface may be caused by an IP conflict in your network. When you encounter this problem, you can perform the following steps:

1. Disconnect A vro from the Network: disconnect the 6609A2 vroa2 from your network and directly connect 6609A2 to your computer vro without connecting to other network devices, such as vswitches, do not connect the WAN port of the router to the network cable connected by the adsl modem ).

2. Update the computer ip address: If your operating system is Windows 98, you can use the winipcfg command to release and update the IP address, you can use ipconfig/release and ipconfig/renew to release and update IP addresses. You can use the ipconfig command to check whether you have obtained the IP address. When you have obtained the IP address, the IP address of the gateway and DHCP server is 192.168.1.1.

3. log on to the page and modify the IP Address: Open the browser, enter 192.168.1.1 in the address bar, and press Enter. If you are prompted to enter the user name and password, the login will be normal. If you cannot log on, press and hold the Reset key for 30 seconds to Reset and repeat Step 1. When you log on to the page, we recommend that you change the IP address of the vro to 192.168.0.100) to avoid IP address conflict on the network. After you modify the IP address of the vro, you must update the IP address of your computer.

4. Modify the tengda vro settings and place the vro in the network environment. I believe that your computer on the LAN can access the Internet, and you can log on to the LAN interface for management. If the preceding method does not solve your problem, you can perform the following steps:

We all know that there are several PCI slots on the computer motherboard. Theoretically, there is no difference between these PCI slots. However, in fact, different motherboard manufacturers have different production capacities, and these slots provide different power supplies to NICs and TV cards such as boards, this is why sometimes some boards must be inserted into which slots can be used; and the Motherboard chipset will also be different, generally, Intel's chipset is more stable than other manufacturers' chipsets, such as Via and SIS. For the above reasons, we recommend that you try to insert the network card into the slot close to the CPU, and the card works relatively stably in the slot close to the CPU.

How can I confirm that my computer and router have been properly connected?

First, check whether the two ends of the network cable are connected to the NIC interface and the lanport of the router, and then check whether the indicators corresponding to the NIC port and the lanport of the router are normal. If the light is abnormal, refer to the reason why a long twisted pair network cable cannot be connected or the speed is very slow. Then check the network connection on the computer: first set the computer's IP address tengda router to automatically obtain the IP address. Then, if it is win98 and wimme, run winipcfg in the running system, on the adapter, select your Nic to check whether the IP address has been obtained and the gateway address is the IP address of the router.) If it is win2k, in the winxp system, enter the command prompt to start-> All Programs-> attachments-> command prompt), and then enter ipconfig to check whether your Nic has obtained the IP address and gateway. If both the IP address and the gateway have been obtained correctly, you can use ping to confirm that: in the command prompt win98 and winme are msdos) Enter ping 192.168.1.1 to obtain the gateway address) if there is a message similar to Reply from 192.168.1.1: bytes = 32 time <1 ms TTL = 32, then your network connection is normal.