Computer can not open the problem of troubleshooting method diagram (Hardware troubleshooting)

Hardware troubleshooting

1. Check your power cord again is not plugged well is very necessary, host, monitor! And make sure your power is unblocked.

2. Disassemble the host to see if your memory stick is plugged in, or unplug the memory strips, and try

3. The discharge of your computer, (unplug the power cord, press the power-on key)

4. Discharge Your Bois!

5. Make sure your computer is equipped with an operating system!

Add: Software Troubleshooting

1. Boot press F8 do not move to advanced options appear in the Let go, select the "Last Known Good Configuration" carriage return repair.
2, the boot press F8 into Safe mode after the exit, select Restart or shutdown in the boot, you can enter the normal mode (repair the registry).
3, if the failure is still, please use the system with the System Restore, restore to you did not appear this time of failure repair (or restore software for System Restore).
4, if the failure is still, using system disk repair, open a command prompt input Sfc/scannow return (SFC and/between a space), insert the original system disk repair system, the system will be automatically compared to repair.
5, if the failure is still, set the optical drive in the BIOS for the first boot device into the original system installation disk press R to select "Repair Installation" can be.
6, if the failure is still, it is recommended to reload the operating system.