Computer keyboard Bluetooth can not use How to do? Notebook Bluetooth cannot use the workaround

First, verify that the Bluetooth keyboard is open

: The Bluetooth keyboard has a separate switch and cannot be used if the Bluetooth keyboard is not turned on.

Open method:

Keyboard power-on key in the left position of the keyboard, the switch left to on to open, the following figure:

Second, verify the Bluetooth keyboard is a power

: Bluetooth keyboard is a separate charging device, if the Bluetooth keyboard does not have electricity, you can not use.

Charging method:

On the left side of the keyboard there is a charging port, the charger connected to this port can charge the keyboard, as shown below:



Note: When the keyboard is charged, the power indicator turns red and the power indicator turns blue when the charge is complete.

Third, the keyboard and the tablet computer again through the Bluetooth connection

: The keyboard base and the tablet is connected through Bluetooth, if there is no use of the situation, it is recommended to reconnect.

Connection method:

1. Press and hold the Connect (Bluetooth icon) button at the top right of the keyboard for 3 seconds, and then enter the pairing mode, as shown below:



2. In the lower right corner of the desktop notification area, right click on the Bluetooth icon, the following figure:



3. Select "Add Bluetooth Device".



4. The "Searching settings" prompt will pop up, as shown below:



5. When the bluetooth keyboard device is searched, click on the device, as shown below:



6. The screen will appear with the password to connect to the keyboard, as shown below:



7. Follow the prompts to enter the password in the keyboard, and then press the "enter" key.



8. At this point you can see the progress bar for the Bluetooth keyboard connection, as shown below:

9. Waiting for the progress bar to display, the Bluetooth keyboard is connected, the following figure:

Four, the Bluetooth driver reinstall

: If none of the above works, then the Bluetooth driver needs to be reinstalled.

Install the Bluetooth drive method (for example, XE300TZC-K01CN model):

1. Click the right mouse button in the Metro interface space and select "All applications" at the bottom right.

 

2. In the "Apply" list, click "SW Update".

 

3. At this point, you can open the SW update software, as follows:

 

4. In the SW Update Software window, click on the bottom left corner of the "Find model 】。

 

5. Enter the model "XE300TZC-K01CN" of the Notebook in the search box in the upper-right corner and search.

 

6. Select the model "XE300TZC-K01CN" to search for.

 

7. Select Windows 8.

 

8. "Bluetooth Driver" hook, and then click "Export" below.