The 1th step: The computer shuts down, and unplug the computer power outlet, disassemble the computer host chassis.
Note: It is best to touch the metal casing yourself so that you can eliminate static electricity or use anti-static wrist. Sometimes it can prevent some unnecessary trouble.
2nd step: Locate the motherboard from the network network card slot, and the good slot interface to press until you hear the card into the bit sound. and determined not to loose (first installation user can refer to the NIC installation instructions).
3rd step: Tighten the Ethernet network card and the screws on the computer chassis.
4th step: Connect the computer power outlet, and the computer boot.
5th step: After the boot, Windows system will be prompted to find new hardware, generally speaking, the common network card driver can be installed directly. If you turn on Device Manager and find that the NIC is not installed, you can use the network card driver or drive the wizard-type software to update the driver.
The 6th step: After installing the general will prompt the computer to need to reboot, after restarting, the network card can install the silk.