Computer Setup Tp-link router prompts wireless configuration network password number error how to solve

Computer Setup Tp-link router prompts wireless configuration network password number error how to solve

1, the use of WPA/WPA2 encryption, this situation is the most likely to be the system does not support, please check the system to support the encryption, click on the wireless Network Properties-association, in the network verification to see whether the system supports the wireless router set in the encryption mode;

2, if there is no universal wireless router set in the encryption, download the operating system patches to support the encryption of the general wireless router or the Universal wireless router encryption method to the wireless network card support encryption methods;

3, the use of WEP encryption, this situation occurs because the password length does not meet the requirements, reconfirm password:

WEP encryption each key type requires the number of key characters:

64-bit key: 5 ASCII characters, 10 hexadecimal characters

128-bit key: 13 ASCII characters, 26 hexadecimal characters

152-bit key: 16 ASCII characters, 32 hexadecimal characters

Follow the steps above to resolve the problem that the network password must be 40-bit or 104-bit wrong.