Computer local connection does not have a local connection to the network connection the workaround is missing

Often meet many friends to reflect that their computer local connection is not, but the cause of the causes are different. When some people say they are gone, they can continue to surf the internet normally, while others say they cannot connect to the Internet at all. Today, the script of the small to come with you to explore the local connection is not the reason and solution!

Related points: Computer boot local connection start very slow solution detailed graphic tutorial

　　One, the local connection is gone, but still can surf the internet normally

Reason: Since the local connection is not available, you can also surf the internet normally, which indicates that the computer hardware is not a problem. But what is the cause of this problem? Pepsi Network small part think most reason is because people use the computer accidentally set the "local connection" to hide, or the damage caused by the virus, the solution is relatively simple.

Answer: First of all, of course, the overall anti-virus, after antivirus still not show, it may be accidentally set up caused by. Right-click My Network Places, select Properties, find local Area Connection, tick the box before "Show icon in notification area after connection" and click OK.

　　Second, the local connection is gone, not the normal internet

Cause: This situation may be caused by careless or virus damage to the local connection to disabled. This means that the network card may be disabled, of course, there may be a network card driver is not a normal installation.

In this case, you can go to the computer's Device Manager to check if the NIC is disabled and the driver is installed properly, as shown below:

Check the NIC driver and whether it is disabled in Device Manager

　　"Local connection" is not found in the properties of "Network Neighborhood"

Cause: In both cases, you will need to find the "Local Area Connection" in the "Network Connections" window, but there are cases where it is not found, in which case it is mostly a hardware problem or bad hardware contact.

Answer:

1. Shut down, unplug the power plug behind the host, open the host, remove the patch on the network card screws, the network card carefully unplug. Use a hair dryer and other tools to clean up the motherboard dust, especially the slot of the network card is blown clean, the layout of the network card with a dry cloth wipe clean, and then use the eraser metal contact piece rub. Reinsert the network card, plug in the power-on test;

2. Right-click Computer-Properties-Device Manager to view at least one of the network adapters in the device list. If not, the network card is not detected by the system. It is necessary to check the network card is not plugged in, or there is a malfunction. If a yellow exclamation point appears on the NIC device name, the driver is not compatible, then the driver needs to be reinstalled.

　　Iv. due to the closure of the service process

Cause: Some users accidentally disabled some services may also cause the loss of local connections.

Answer: Right-click on the computer-management-services and applications-services, find the network connections and double-click, the following window will appear: The New Peaches U-disk Startup type to "Automatic" or "manual" To change the "service status" to "started", switch to the "dependency" button, Change the remote Procedure call (RPC) service status to Automatic and started

In addition to the above four reasons, it is also possible that the netizen himself accidentally deleted the local connection. So, there are a number of reasons why the local connection is gone, and we have to figure out the reason before we solve it!