Computer network management software remote switching machine monitoring scheme

In order to facilitate the administrator of the local area network to monitor the machine, days easy to network management software to increase the remote switch function, its specific operations are as follows:

Figure 1

Remote boot:

The remote boot needs to know the network card address of the machine, turn on the wake-up function of its network card (most of the network cards currently support remote wake-up and open by default). To turn on remote wake-up, you can use the following methods:

Right-click the Network Places-> property-> Local Area Connection-> General-> configuration-> Advanced. As shown below:

Select Magic Packet & pattern in the Wake function and click OK.

Remote shutdown:

In the IP address bar shown in Figure 1, click Add, and then do the appropriate operation.

Note: The following conditions are required for remote shutdown:

1. "Microsoft network Client" and "File and Printer Sharing for Microsoft Networks" on the target machine need to be turned on by right-clicking My Network Places, clicking Properties, choosing the current connection right-click Properties, and then selecting the Microsoft Network Client "and" File and Printer Sharing for Microsoft networks. " ) as shown in the following illustration:

2. Need to have the target machine IP address, Administrator account and password (note: Must be Administrator account and can not use the Guest account)

3. The local security setting for the user account of the target machine should be classic-local users authenticate as themselves

Set the method to: Click the Start menu, select Set-> Control Panel-> Administrative Tools-> Local Security Policy-> security Settings-> Local policy-> security options, select "Network access: Sharing and security mode for local accounts" in the security options, double-click, In the dialog box that pops up, select Classic-Local users authenticate with themselves as shown in the following illustration:

4. If the target machine is running a firewall, please allow 139 and 445 port access;

5.vista you need to turn off User Account Control (UAC) (the Close method is: "Start"-> "Settings"-> "Control Panel"-> "user account"-> "turn on or off" user Account Control ").

Through this function, the network management can carry on the batch operation to the LAN host, reduce the workload of the network administrator.