Configuration file Import for H3C switch

First, the configuration file import of the switch

1, check the original model of the switch and the system configuration file (important or not enter into force possible)

1.1. Dis ver

1.2, Dir/all

2, with Con line into the new switch to confirm the model and system in the configuration Management VLAN interface is zoned VLAN,PC configuration and VLAN the same segment (Guaranteed connectivity)

2.1. Switch configuration

Vlan

Inter VLAN 2

IP Add 172.17.254.53 24

Inter G1/0/1

Port ACC VLAN 2

2.2, configure the IP of the PC, gateway!

3, Import the configuration file (before importing the directory defined TFTP)

...

File would be transferred in binary mode

Downloading file from the remote TFTP server, please wait ....

tftp:8348 Bytes received in 0 second (s)

File downloaded successfully.

<H3C>

Please wait ... done!

Please wait ... done!

Current startup Saved-configuration File:null

Next Main startup Saved-configuration File:flash:/startup.cfg

Next Backup Startup Saved-configuration file:flash:/startup.cfg

Please wait ... done!

The current configuration is written to the device. Is you sure? [Y/n]:y

Please input the file name (*.CFG) [flash:/startup.cfg]

(to leave the existing filename unchanged, press the ENTER key):

FLASH:/STARTUP.CFG exists, overwrite? [Y/n]:n------------Note

<H3C>

Start to check configuration with next startup configuration file, please wait.

........ done!

This command would reboot the device. Current configuration is lost in next

startup if you continue. Continue? [Y/n]:y

#Apr 20:09:47:936 h3c dev/1/reboot:

Reboot device by command.

%APR 20:09:48:21 h3c dev/4/system REBOOT:

System is rebooting now.

Press ENTER to get started.

<3F-S5528C>

%APR 20:00:39:607 3f-s5528c shell/4/login:console LOGIN from aux0

<3F-S5528C>

<3F-S5528C>

Configuration file Import for H3C switch