Configuration King 6.55WEB New release steps

Reprint please ... No one's going to turn around. Keep it for yourself.

Objective: This tutorial implements a Web server and a Web screen client with a total of two projects by configuring King 6.55. The server project is named server and the client point is client. The server side provides data, and the Client displays the data obtained from the server by publishing a web screen. For the sake of simplicity. This example takes the Server's time data as a display.

A Set up IE Browser

1. Add a Secure site

Click the Path tool àinternet option à secure –> trusted site à site à add its own server IP address remove tick

1. Set Run ActiveX Run

Click the Path tool àinternet option à secure –> trusted site à custom level à find ActiveX Related settings set to enable or prompt

Two Server-Side Engineering builds

1. New Server Project
2. Set up network configuration

Click on the path system configuration à network configuration à network Parameters tab set into networking

Under the Node Type tab, tick the following:

Do not check the customer configuration

Three Client-side Engineering builds

1. Establish Client Project
2. Set up network configuration

Click on the path system configuration à network configuration à network Parameters tab set into networking

Under Node Type tab, set the logon server to the IP address of the server project because this example server is the same as the client in a host computer

The Customer Configuration tab is as follows:

1. Add a server site

Click on the path site--Right click Next to the blank (Picture: Red fork) Select New remote site à read node configuration à in the network Select the project path of the server if it is native can select the project path of the server directly in My Computer

1. New screen PIC1 set Pic1 to main interface (path: System configuration à set run System à main interface configuration)

Add text text to set the time to animate the connection to the server

Four Client Web Publishing

Locate the Tools folder under the Configuration King installation directory open the Web Publishing tool settings as follows:

Note that my client project is called Client_test, where you select your own client path and click Publish. Configure the Wang Che back to the server project to run view. The Web site http://192.168.1.244/pic1/entered in Internet Explorer is based on its own situation, and the Kingview is a Web server through IIS. Run effect

Configuration King 6.55WEB New release steps