Configuration of a Ge management network switch

If you have configured a name for the vswitch, you can enter the name of the vswitch directly with a blank space after the "Telnet" command. After reading this article, you must have learned a lot, I hope this article will teach you more things.

Run the Telnet client program on the computer. This program is available in Windows and UNIX and Linux systems, and its usage is basically compatible, especially in Windows ), and log on to the remote switch. If the IP address of the vswitch is 61.159.62.182.

The following describes how to enter the configuration interface. As for how to configure the interface, it depends on the specific situation, rather than the specific description. The steps to enter the configuration page are simple. You only need to take two simple steps: Step 2: Click the start button and select the run menu item, and then press the format "telnet61.159.62.182" in the dialog box.

If you do not enter an IP address for logon, you can connect to the instance after entering the telnet main interface. However, it takes another step to enter the IP address to be connected ),. If you have configured a name for the vswitch, you can also directly go to "Telnet".

Enter a space after the command and enter the name of the switch configuration.

 

Note that "Hostnqme includes the name of the vswitch, but we have configured an IP address for the vswitch in front, so here it is more about the IP address of the vswitch. Generally, the "Port" following the format is not required. It is used to set the Port used for Telnet communication.

Generally, the Telnet communication port is specified in the TCP/IP protocol. It is port 23, so we do not need to change it. That is to say we can skip this parameter. Step 2. After entering the information, click "OK" or click the Enter key to establish a connection with the remote switch. Interface displayed when you establish a connection with a computer through the Tetnet and the Catalyst1900 switch.

 

After using the Console port to configure IP address information for the switch and enable the HTTP service, you can access the switch through a Web browser that supports JAVA, you can also modify the parameters of a vswitch through a Web browser and manage the vswitch.

In fact, you can modify and set many important parameters of a vswitch on the Web interface, and view the running status of the vswitch in real time. However, before using a Web browser to access a vswitch, make sure that the following preparations have been made:

Next, you can view the parameters and running status of the vswitch step by step through the prompts on the Web interface, and make necessary modifications to some parameters of the vswitch as needed, this article briefly introduces the basic configuration methods of switches. The next article will introduce the common application of Switch configuration-VLAN network division and configuration methods in detail.

Edit recommendations]