1. Prepare at least two network cards to clear the existing configuration on the NIC
In Settings--Add network adapter-next--complete
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6B/5C/wKiom1UruQKxqn9OAAImT1TDuGg448.jpg "title=" 1.PNG " alt= "Wkiom1uruqkxqn9oaaimt1tdugg448.jpg"/>
First change the adapter settings in the network connection in the network adapter right-click Property in the Ivp4 change to clear the original configuration , or leave the default auto-connect if it was not set originally. The network card must be in the enabled state
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6B/59/wKioL1Uru1ezKAS2AAMa3u0SV2c220.jpg "title=" 2.PNG " alt= "Wkiol1uru1ezkas2aama3u0sv2c220.jpg"/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6B/58/wKioL1UrtcijABvAAAHRi75-FIk807.jpg "title=" capture. PNG "alt=" Wkiol1urtcijabvaaahri75-fik807.jpg "/>
First, in the settings to add the network adapter, the two NIC network connection mode is bridged
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6B/5C/wKiom1UrtZPx-9i5AALhdznk-BM342.jpg "title=" 1.PNG " alt= "Wkiom1urtzpx-9i5aalhdznk-bm342.jpg"/>
NIC Bindings: Server Manager-local server--nic combination (disabled) point on NIC Disabled-task (new group)650) this.width=650; "Src=" Http://s3.51cto.com/wyfs02 /m02/6b/58/wkiol1urtyetesxwaameqfcrnha487.jpg "title=" 2.PNG "style=" Float:none; "alt=" Wkiol1urtyetesxwaameqfcrnha487.jpg "/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6B/5C/wKiom1UrtdeDjpVFAAHcTXY0LNs002.jpg "style=" float: none; "title=" 3.PNG "alt=" Wkiom1urtdedjpvfaahctxy0lns002.jpg "/>
Static Group tick two network cards to fill in the group name
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6B/58/wKioL1UrtyeD-uLzAAELM4aiyl0907.jpg "style=" float: none; "title=" 4.PNG "alt=" wkiol1urtyed-ulzaaelm4aiyl0907.jpg "/>650) this.width=650; src= http://s3.51cto.com/ Wyfs02/m00/6b/58/wkiol1urt76rjk79aafoblxaica425.jpg "title=" 5.PNG "alt=" Wkiol1urt76rjk79aafoblxaica425.jpg "/>
The group you set up will appear in the network connection after the setup is complete
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6B/58/wKioL1Urt_GAL4rzAAFBY-G8_3M768.jpg "title=" 6.PNG " alt= "Wkiol1urt_gal4rzaafby-g8_3m768.jpg"/>
Then reconfigure the network right--Property--ipv4--Configure IP in the group you set
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6B/5C/wKiom1Urts2C08NWAAHXb0ie6F0682.jpg "title=" 7.PNG " alt= "Wkiom1urts2c08nwaahxb0ie6f0682.jpg"/>
Complete
Ping IP in the command line such as Ping 192.168.10.103–t
If you can continue pinging, disconnect one of the NICs to see if you can still ping the
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6B/5C/wKiom1UruBKB3-foAAV8XS0C40I591.jpg "title=" 8.PNG " alt= "Wkiom1urubkb3-foaav8xs0c40i591.jpg"/>
The result is not affecting
Still be able to ping through, but two nets I are disconnected obviously definitely disconnected
Configuration of the Windows server 2012 dual NIC