Configurations of the home broadband dual-router in jinlang

At present, all ADSL numbers used for accessing the internet at home broadband are connected using MODEM. This article describes how to implement dual-route connection through adsl modem + router A + router B.
 
1. Route the LAN ports of vroa A to the WAN ports of vrob B, set vrob B, and change the default gateway address of vrob B to 192.168.5.1, because if both of them are 192.168.0.1, they will conflict.
 
2. Set the WAN port of vrob B and use A fixed static IP address to access the Internet. The IP address is 192.168.0.222. vroa A uses 192.168.0.2-192.168.0.254 and there is no used IP address between them, gateway: 192.168.0.1. Set DNS information manually.
 
3. Configure the WAN port of vrob B and use the dynamic IP address to automatically obtain the IP address. If the IP address can be obtained, the Internet can be accessed. If the IP address cannot be obtained, the static IP address is used.
 
4. After configuration, access 192.168.0.1 is the management interface of vroa A, and access 192.168.5.1 is the management interface of vrob B. Now, we have learned how to implement dual-route connection through ADSL cat + router A + router B.