Configure and restore a vro

No need to set the first vro. Now, set the second vro. First, connect a computer to the second LAN interface. Enter the vro IP address in the address bar of the browser. Generally, the address is 192.168.1.1 username, admin password, and admin. Click the network parameter WAN port and set it to a dynamic IP address.

 

Then set the IP address of the LAN port to 192.168.0.1 to save,

At this time, you will be prompted to restart the address to choose to confirm, restart. Now that the router is set up, the following is the connection. Connect the LAN port of the first router to the second WAN port, and then the second route can connect to the computer. The first computer can be connected with three other ports, that is, seven computers can now access the Internet together.

If one day the second route does not need to change the interface more directly, how can we change it back? Some people say that simply entering 192.168.0.1 in the browser can be changed back. Yes, it should be okay, but it may not be able to open the router setting interface. This can be opened for some special routers.) in this case, you need to set the IP address on the computer to change it, in the INTERNET (TCP/IP) attribute of the local connection, change the automatically obtained IP address to 192.168.0.2 using the following IP address,

To restore the original vro settings. (Do not forget to change the local connection back after recovery) This is a record of little experience, and I hope it will help you.