Configure putty to log on to ubuntu. First, check whether the sshserver has started ps-e | grepssh and then enable the ssh-server Service sudo apt-get installopenssh-server. If only ssh-agent is enabled, the ssh-server has not been started., /etc/init. d/sshstart. If you see sshd, it indicates that the ssh-server has been started. The ssh-server configuration file is located in/etc/ssh/sshd_config. Here, you can define the SSH service port. The default port is 22. You can define other port numbers, such as 222. Then restart the SSH service: sudo/etc/init. d/ssh resart www.2cto.com. After you download putty, you must set it first. As shown in the following figure: you can log on to the linux host. However, we also need to set the font. If it is not set, character garbled characters will occur. The font settings are as follows:
You can use putty after setting it in this way. Try it on your computer!