Configure host name and Ethernet interface for the Huawei 3COM Router

The following describes how to use the Huawei 3COM router to configure host names and Ethernet interfaces. Each vro should have its own name in the network. Generally, the default name of the vrouter of Huawei 3COM is router, that is, the host name is router. To better differentiate different routers, we need to modify the host name. On the one hand, it facilitates memory and reduces the difficulty of troubleshooting ......

Huawei 3COM vro configuration method:

Here, we will set the host name as syxx as an example, enter "sysname syxx", and then press the Enter key to execute the command. Then, the host name before the host prompt changes to syxx, indicating that the host name is successfully set.

Configure an Ethernet interface for the Huawei 3COM Router

A vro is like a PC, and different interfaces are like computer NICs. Each computer must set an IP address for communication in the network. The same is true for Routers. We need to assign an IP address and subnet mask for the interface to work properly. The most common interface is the Ethernet interface. This article describes how to configure an Ethernet interface.

◆ Log on to the vro and use the correct user name and password to log on to the vro. This requires administrator or operator permissions.

◆ Enter the Huawei 3COM router to configure the Ethernet interface E0 and int e 0

◆ Set the ip address and subnet mask, ip address 192.168.1.1 255.255.0

In this way, the E0 port IP address is allocated. Of course, when the IP address is set for the interface, the 3COM router automatically opens by default. Therefore, you do not need to execute the no shutdown command to open the interface as the CISCO device does.

Tips for configuring a Huawei 3COM vro: Sometimes you need to disable a port for a short time. You need to reconfigure the IP address if you want to cancel it before using it again, at this time, you can also disable the PORT command on the Huawei 3COM router. Enter shutdown and press enter to disable the port. If you want to recover, enter undo shutdown to reactivate the port.

How to modify the Display language of the Huawei 3COM Router

Through the difference between Huawei 3COM IOS and cisco ios, we already know that Huawei 3COM IOS supports Chinese display and Chinese comments. How can we switch the Display language from English to Chinese?

Configuration method: log on to the vro and enter the language directly. Then, press Enter. In the following dialog, you will be asked if you want to switch the language mode. After selecting Y, IOS will automatically switch to the Chinese mode, all command comments are in Chinese. Similarly, to return to English mode, you only need to enter language again and press Enter. Then, if you select Y, the English mode is returned.

Comment on Huawei 3COM vro Configuration

When a user logs on to a vro, we may not know which port is used. In this case, we can add comments to the port, in this way, you can directly view the comment to understand the port usage, so that we can manage the router. The setting method is as follows:
◆ Successfully logged on to the vro
◆ Enter port E0
◆ Int e0
◆ Add the comment "waiwang chu kou"
◆ Description waiwang chu kou

After configuring the Huawei 3COM router, we can run the display cur command to view the information. The description waiwang chu kou is displayed below the ethernet0 interface.