Configure the snmp service in linux

Configure the snmp service in linux


-- How to Configure snmp on Linux


-- Attach an iso CD image file first
Mount-o loop/soft/rhel-server-6.4-x86_64-dvd.iso/mnt/cdrom


-- Check whether the snmp package is installed first.
# Rpm-qa | grep snmp


-- Install the package using yum to prevent Incomplete installation due to dependency.
# Yum install net-snmp -*
-- Or install each package separately
Rpm-ivh net-snmp-libs-5.3.2.2-17.el5.x86_64.rpm


-- Configure the etc/snmp/snmpd. conf file after the required package is installed.
Modify the snmpd. conf file as follows:


1. Modify the Default community string


Com2sec notConfigUser default public


Change public to the specified string tppublic.


2. Run the following statements:


Access notConfigGroup "" any noauth exact systemview none
Changed:


Access notConfigGroup "" any noauth exact mib2 none


3. Remove the # below


# View mib2 shortded .iso.org. dod. internet. mgmt. mib-2 fc






-- Start the snmpd service


Service snmpd start
Or/etc/rc. d/init. d/snmpd


-- Set to boot

$ Chkconfig snmpd on


-- View status
Chkconfig -- list | grep snmpd