This configuration method is applicable to the installation of VM Linux Virtual Machine Service on workera by configuring CRT to access workerb.
1) install the vmvm and configure the network mode of the VM as Nat
2) Enable the virtual network configuration of the VM software:
3) Select the NAT option box. record the information marked in the red box and use it when you want to modify the Linux server configuration. click the button marked in the blue box.
4) Select the port forwarding option box
5) set TCP and UDP port forwarding:
6) modify the network configuration of the Linux Virtual Machine: Change the IP address acquisition method to the static IP address mode. The IP address can be the IP address before the modification. The subnet mask and the information recorded in step 3 are used; modify DNS configuration: Configure DNS as the gateway address recorded in step 3.
7) configure the CRT connection on worker A: create a connection. The IP address is the IP address of worker B, and the port is the forwarding port set for you (12345)
8) disable the firewall on worker B and the Linux Server firewall.
After completing the preceding steps, you can access the Linux Virtual Machine on worker B from the CRT on worker.