Configuring Telnet enable on a Cisco device does not require a password for direct access to privileges

Tag: Configure Telnet on a Cisco device to enable no password direct access privileges

Switch (config) #username cxw privilege Password 123.com

Switch (config) #line vty 0 4
Switch (config-line) #login Local
Switch (Config-line) #exit

Switch (config) #int vlan 1
Switch (config-if) #ip add 192.168.1.1 255.255.255.0
Switch (config-if) #no shut

Pc>telnet 192.168.1.1
Trying 192.168.1.1 ... Open

User Access Verification

Username:cxw
Password:
Switch#conf T
Enter configuration commands, one per line. End with cntl/z.
Switch (config) #A

Configuring Telnet enable on a Cisco device does not require a password for direct access to privileges