Connection and configuration of Netapp Nic and external Switch

Connection and configuration of Netapp Nic and external switch 1. Netapp Nic setting category: www.2cto.com. single mode usually uses two interfaces as single mode to connect two external switches. At the same time, only one port has data streams. (NA's single mode redundancy) B. multi mode generally has two interfaces for multi mode, which are connected to one external server or two stack switches. At the same time, both ports have data streams. (dual-port Line redundancy) c. lacp mode generally has two or four interfaces for multi mode to be connected to one external server or two stackswitches. At the same time, all ports have data streams. (dual-port Line redundancy) d. the single mode and multi mode are mixed. Generally, there are four interfaces, which can be-2 multi in single mode and used to connect to two external switches, at the same time, only the two ports of multi mode have data streams. therefore, it is better to use the stack switch if conditions permit, no, this can only rely on STP to redundant lacp settings. Example: NAS01> rdfile/etc/rc # Regenerated by registry Sat Apr 28 16:53:19 CDT 2012 # Auto-generated by cifs setup Thu Mar 3 16:29:45 CST 2011 # Auto-generated by setup Thu Mar 3 03:25:47 GMT 2011 hostname NAS01vif create lacp vifa-B ip e2a e2b e3a e3b # use standard 802.3AD.vlan create vifa 2 3 # create vlanifconfig vifa partner vifb # specify cluster partner vifbifconfig vifa-2 'hostname'-vifa-2 netmask 255.255.255.0 mtusize 9000 partner vifb-2 # specify vlan interface, ip address (resolved by hostname) subnet mask, MTU, partner interface ifconfig vifa-3 'hostname'-vifa-3 netmask route 255.255.0 mtusize 9000 partner vifb-3route add default 192.168.1.1 # add default route routed on # enable routing function options dns. enable onoptions dns. domainname gcn. mediatek. incoptions nis. enable onoptions nis. example of domainname mcdswrdsavecore single and multi mode NAS01> rdfile/etc/rc # Regenerated by registry Mon Dec 05 13:02:51 CDT 2011 # Auto-generated by cifs setup Thu Mar 3 16:29:45 CST 2011 # Auto -generated by setup Thu Mar 3 03:25:47 GMT 2011 hostname NAS01vif create multi vif2-B ip e2b e2a # convert e2a, e2b is made into multi mode vif2 vif create multi vif3-B ip e3a e3b # e3a and e3b are made into multi mode vif3 vif create single vifa vif2 vif3 # vif2, vif3 into single mode vifa ifconfig vifa partner vifb # specify cluster partner vifbvlan create vifa 2 3 # create vlanifconfig vifa-2 192.168.2.1 netmask 255.255.255.0 partner vifb-2 # specify vlan interface, IP address, subnet mask, MTU, partner interface ifconfig vifa-3 192.168.3.1 netmask 255.255.255.0 partner vifb-3route add default 192.168.1.1 routed onoptions dns. enable onoptions dns. domainname gcn. mediatek. incoptions nis. enable onoptions nis. domainname mcdswrdsavecore