Connection problem of Linux and win network connection WINSCP

1. See Windows and Linux firewall shut down

2. Look at the IP address of Linux and the IP address of Windows is not in the same network segment, to be paired with the same network segment, such as: Windows 192.168.1.9,linux will be selected between 192.168.1.1~192.168.1.254, However, to remove the 192.168.1.19, 192.168.1.1 (this IP is generally gateway, not assignable) and 192.168.1.255 (broadcast address within the network segment, not assignable), viewing the Windows IP address needs to enter "Ipconfig/all" at the command line, Displays the IP configuration of the host network card, where the "local connection" IP is the DNS of Windows host Ip,linux, the Gateway, and the mask is the same as Windows

3. Look at the VMware services are open, the method is as follows: At the same time press the win key and R, enter "Service.msc", enter after the start of VMware Service, right-click Startup, not necessarily open, but it is best to open, especially with Dhcp,nat related

4. Virtual machine Selection Bridge, no Nat selected

The above may also be some people can not ping ... Because I am, the above is my summary of the online answer, the following talk about my own solution:

Open VMware, click "Edit"

Then in the "Bridge to" there from the "automatic" change to the personal connection of the network, the lower right corner of the application.

Connection problem of Linux and win network connection WINSCP