Cool Dog Music Library can only open solutions with Web pages

Do not know if you have encountered, a little menu bar button, it automatically jumped to the page

The pop-up window is shown below:

　　What about a cool dog music library that can only be opened with a Web page?

1, the Network setup problem

This reason is more than the need to manually specify the IP, gateway, DNS server networking mode, and using a proxy server to access the Internet. Carefully check your computer's network settings.

2. Problems with DNS servers

When IE can not browse the Web page, you can try to access the IP address, if you have access, then it should be a DNS problem, causing DNS problems may be connected to the network when the DNS error or the DNS server itself problem, then you can manually specify the DNS service ( The address can be the DNS server address provided by your local ISP, or the DNS server address can be used elsewhere. In the properties of the network, (Control Panel-Network and dialing connections-Local Area Connection-right key property-TCP/IP protocol-Properties-use the following DNS server address). Different ISPs have different DNS addresses. Sometimes it is a problem with a router or network card that is unable to connect to the ISP's DNS service, which allows the router to be shut down for a while, or to reset the router.

Another possibility is that there is a problem with the local DNS cache. In order to improve the speed of Web site access, the system will automatically have visited and obtain the IP address of the site into the local DNS cache, once the site is accessed, it is no longer through the DNS server and directly from the local DNS cache to remove the IP address of the site to access. Therefore, if there is a problem with the local DNS cache, it can cause the Web site to be inaccessible. You can perform ipconfig/flushdns in run to rebuild the local DNS cache.

3, the problem of the browser itself

When the browser itself fails, it naturally affects browsing, or the browser is corrupted by malicious modification can also cause the Web page can not be browsed. Now you can try reinstalling the browser, PC6 browser list: http://www.pc6.com/pc/84/

4, the network firewall problem

If the network firewall is not set up properly, such as high security level, accidentally put IE into the block access list, the wrong firewall policy, and so on, you can try to check the policy, reduce the firewall security level or directly turn off the test is back to normal.

5, network protocol and the problem of NIC driver

It is possible that the network protocol (especially the TCP/IP protocol) or NIC driver corruption may be caused by an attempt to reconnect the NIC driver and network protocol.

6, the Hosts file issues

The Hosts file is modified, will also cause the browsing is not normal, the solution is of course, the contents of the Hosts file empty.

7, anti-virus software real-time monitoring problems

This is not often seen, but sometimes it is related to real-time monitoring, because now the anti-virus software real-time monitoring has added to the content of the Web page monitoring.

8, infection caused by the virus

Look at the process in Task Manager (go to the method, put the mouse on the taskbar, right-click-Task Manager-process) to see how the CPU occupancy rate, if it is 100%, can be sure, is infected with the virus, then you want to run other programs is simply a suffer. This is to find out which process is consuming CPU resources greedily. Find, it is best to record the name, and then click the end, if you can not end, you want to start to Safe mode to remove the Dongdong, but also to enter the registration table, (method: Start-run, input regedit) in the Registry dialog box, point edit- Find, enter that program name, find, click the right mouse button to delete, and then do a few more searches, often can be completely removed clean.

There are a lot of viruses, anti-virus software powerless, the only way is to manually delete.

10, unable to open the level two link

There is also a phenomenon needs special attention: is able to open the homepage of the site, but can not open the level two link, if so, the processing method is to re-register the following DLL file:

In Start-run ENTER:

regsvr32 Shdocvw.dll

regsvr32 Shell32.dll (Note this command, first do not lose)

regsvr32 Oleaut32.dll

regsvr32 Actxprxy.dll

regsvr32 Mshtml.dll

regsvr32 Urlmon.dll

regsvr32 Msjava.dll

regsvr32 Browseui.dll

Note: Press ENTER for each entry. The second command does not need to lose, after the completion of these commands restart Windows, if found invalid, and then re-enter again, this time enter the second command.